1. Manuals
  2. Brands
  3. SANTRONIC Manuals
  4. Security Camera
  5. HDC-HDBW3200
  6. Quick start manual

SANTRONIC HDC-HDBW3200 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HDC-HDBW3200

Quick Start Guide

Version 1.0.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDC-HDBW3200 and is the answer not in the manual?

Questions and answers

Summary of Contents for SANTRONIC HDC-HDBW3200

  • Page 1: Quick Start Guide

    HDC-HDBW3200 Quick Start Guide Version 1.0.0...
  • Page 2 Welcome Thank you for purchasing our digital camera! This quick start guide is designed to be a reference tool for your system. Please keep this start guide well for future reference. Please open the accessory bag to check the items one by one in accordance with the list below. Contact your local retailer ASAP if something is missing or damaged in the bag.
  • Page 3 The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera. 6. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work. Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface.

  • Page 4: Table Of Contents

    Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Framework ........................... 2 Installation............................ 3 Device Installation ......................3 Lens Adjustment ......................6 System Connection ...................... 6 OSD Button ..........................8 HDC Configuration Tool ......................9 Overview ........................9 Operation ........................

  • Page 5: General Introduction

    1 General Introduction 1.1 Overview This series camera conforms to the HD-SDI specifications. It supports high speed video signal, almost no delaying in the transmission. The HD-SDI interface adopts the coaxial cable and uses the BNC port as the cable standard. This series product has the megapixel definition and supports the DC 12V/AC 24V power supplying.

  • Page 6: Framework

    2 Framework This series camera dimension and structure information is shown as below. The unit is mm. See Figure 2-1 and Figure 2-2. Figure 2-1 Figure 2-2...

  • Page 7: Installation

    3 Installation 3.1 Device Installation Step 1 Use the inner hexagonal wrench (provided) to loose the three inner hexagon screws in the dome cover and then open the cover. See Figure 3-1. Figure 3-1 Step 2 Use the inner hexagonal wrench (provided) to loose the three inner hexagon screws in the dome and then remove the device pedestal.
  • Page 8 Step 3 Draw out the cable exit and four screw holes in the installation position according to the device pedestal. Dig the four plastic expansion bolt holes and cable exit. Insert the four plastic expansion bolts into the screw holes. Step 4 Adjust the camera pedestal to the proper position and then draw the cable through the cable exit you just dug in the ceiling (wall).
  • Page 9  c):Slightly loose the screw of the pressing slice, you can adjust the video rotation angle of the module (0°～355°).  d):Adjust the turning ring of the pedestal, you can adjust the module pan rotation angle 0°～355°  e): Put the enclose back after you completed the setup. With IR light Without IR light Figure 3-4...

  • Page 10: Lens Adjustment

    Figure 3-6 3.2 Lens Adjustment Step 1 Slightly loose the screw B manually and then turn the screw B slowly. Adjust the lens focus distance to the proper position according to the monitor video. See Figure 3-7. Step 2 Use the flat screwdriver to loose the screw A slightly and then turn the Screw A slowly. Adjust the lens focus to get the clear video and then use the flat screwdriver to secure the screw firmly.
  • Page 11 PC-end Analog DVR SDI Camera SDI-DVR...

  • Page 12: Osd Button

    4 OSD Button In Figure 4-1, press the red highlighted button for a long time to go to the menu interface. Press it for a short while is to confirm current operation. Figure 4-1 Push the button up/down to select the corresponding item and then push the button left/right to adjust the parameter.

  • Page 13: Hdc Configuration Tool

    5 HDC Configuration Tool 5.1 Overview You can use HDC configuration tool to set the device parameter and upgrade the system. 5.2 Operation Double click the “485Configs.exe” icon; you can see an interface is shown as in Figure 5-1. In the device interface, you can view COM setup, parameter setup, OSD, upgrade information and etc.
  • Page 14 Figure 5-2 The upgrade interface is shown as in Figure 5-3. Figure 5-3 You can refer to the following sheet for detailed information. Item Note Select the corresponding COM number. COM Setup Baud rate Default value is 9600. (Read-only)
  • Page 15 Parity None Data bit Default value is 8. (Read-only). Stop bit Default value is 1. (Read-only). Current status Display the corresponding COM status. System FPGA version and date There are hardware version and software version. Information You can view device current version information and date.
  • Page 16 Exposure There are 15 levels ranging from -7 to 7. You can set compensation the corresponding value to adjust the video total brightness. Others Mirror It is the pan rotation. You can check the box to enable this function. Otherwise it is in normal mode. Negative It is to turn the bright part to the dark part and turn the video...

  • Page 17: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Component Name Toxic or Hazardous Materials or Elements Cr VI PBDE ○ ○ ○ ○ ○ ○ Circuit Board Component ○ ○ ○ ○ ○ ○ Device Construction Material ○ ○ ○ ○ ○...

Table of Contents