Technical Specifications; Service; Warranty; Copyright, Trademarks - Pro-Ject Audio Systems Bluetooth Box E Instructions For Use

Hide thumbs Also See for Bluetooth Box E:

Table of Contents

Technical specifications Pro-Ject Bluetooth Box E

Effective range of wireless signal

Line-level output:

Output voltage:

Digital outputs:

Bluetooth version:

Supported codecs:

Outboard power supply:

Power consumption:

Dimensions W x H x D (D with sockets): 120 x 32 x 100 mm

Weight:

Should you encounter a problem which you are not able to alleviate or identify despite the above information,

please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should

be sent to the responsible distributor in your country.

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or changes to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

TOSlink

is a registered trademark of Toshiba Corporation.

up to 10m in case of direct visibility

1 x RCA/Cinch

2Vrms

1 x optical (TOSlink

)

2.1 + EDR

aptX, SBC, A2DP Bluetooth profile

9V/300mA DC

100mA/9V DC,<1W in standby

250g without power supply

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.

Table of Contents

Need help?

Do you have a question about the Bluetooth Box E and is the answer not in the manual?