Table of Contents
Advertisement
Quick Links
Drop-In Induction Warmers and Ranges
INSTALLATION AND OPERATING INSTRUCTIONS
IMPORTANT INFORMATION READ BEFORE USE
It is recommended that maintenance and repairs be conducted by authorized service agents using genuine
Nemco replacement parts. Nemco is not responsible for the damages caused by unauthorized service agents
or parts. The information contained in this manual is subject to updates and/or change at the discretion of Nemco
Food Equipment without notice. Please read the Installation and Operating Instructions in its entirety before
attempting to install or operate this unit.
P: 419.542.7751
9100, 9100-C
9100-1
9110, 9110-C
9110-1
9111-1
Page | 1
F: 419.5426690
800.782.761
nemcofoodequip.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Nemco 9100
- Page 1 Nemco replacement parts. Nemco is not responsible for the damages caused by unauthorized service agents or parts. The information contained in this manual is subject to updates and/or change at the discretion of Nemco Food Equipment without notice. Please read the Installation and Operating Instructions in its entirety before attempting to install or operate this unit.
-
Page 2: Table Of Contents
Table of Contents Important Safety Instructions ........................3 Control Features ............................4 Power Settings/Cooking Guide ........................6 Cleaning the Induction Range ........................7 Cookware Requirements ..........................7 Installation Guide ............................8 Troubleshooting/Error Codes ........................9 Warranty ..............................10 Page | 2 P: 419.542.7751 F: 419.5426690 800.782.761... -
Page 3: Important Safety Instructions
10) This appliance should be serviced only by qualified should be followed, including the following: service personnel. Contact Nemco for the authorized Warning – To reduce the risk of burns, electric shock, fire, service facility for examination, repair or adjustment. -
Page 4: Control Features
Control Features Power On/OFF Display Power UP Power Down The range will not operate without an appropriate pan or vessel in place on the cooktop. After a few seconds, the display will flash ‘U’ indicating that no pan is present. If the pan is removed during cooking, the unit will turn off after about 40 seconds and the display will show ‘0’. -
Page 5: Operating Instructions
5. Press the Power UP ‘ʌ’ button to increase the power setting. 6. Press the Power Down button ‘v’ to decrease the power level. 7. Warming Units: (9100-1, 9100): The power will adjust from 1 to 7. See chart for approximate holding temperatures. Cooking units: 9110, the power will adjust from 1 to 9. -
Page 6: Power Settings/Cooking Guide
6. Chocolate Melting: Use setting 1. For Warming units (9100, 9100-1), the following chart shows an approximate temperature guide. Results will vary depending on the type of pan, and the type and volume of food being held. -
Page 7: Cleaning The Induction Range
If the display flashes ‘U’ the pan is not compatible with induction cooking. Product Specifications Model Frequency Voltage Amps Power Weight Dimensions 9100, 9100-C 270 W L 14 9/16” 91000-1 208 or 240 400 W 50/60Hz 14 lbs. W 11 5/8”... -
Page 8: Installation Guide
Installation Guide Always ensure that the glass surface of the range is mounted FLUSH with the counter top. The exposed edge of the glass is fragile and can be easily chipped or broken by side impact. If flush mounting is not feasible, you can purchase the optional Stainless Steel Trim Ring this allows you make a simple cut-out in the counter top, and the Trim Ring supports the unit and protects the glass edge from damage. -
Page 9: Troubleshooting/Error Codes
Troubleshooting/Error Codes Flashing Cause Solution Display Indication No pan or non- induction pan Place an appropriate pan on the cooktop target Over current Check for abnormal conditions like water, moisture or broken parts or cord. Unplug the unit. Plug it back in. If the error continues, contact customer service. -
Page 10: Warranty
The warranty provided for herein shall be limited to parts and labor. Any determination that a product is defective or covered by this warranty, shall be made by Nemco, in its sole discretion. - Page 11 301 Meuse Argonne Hicksville, OH 43526 Page | 11 P: 419.542.7751 F: 419.5426690 800.782.761 nemcofoodequip.com...
Need help?
Do you have a question about the 9100 and is the answer not in the manual?
Questions and answers