How to adjust brake balance
Preparation for adjusting the brake balance
►
Select the DDU pages showing P BRK FRONT and P BRK REAR
►
Press brake pedal to 15 bar front
►
Check the rear value – 12 bar is the target
►
Adjusting the brake balance
►
Turn the yellow knob
►
clockwise to reduce pressure in the rear
anti-clockwise to increase pressure in the rear
While turning the knob do not push the brake-pedal
►
this will block the regulation
Adjust the brake pressure limiter
►
In order to limit the max. pressure of the rear axle you can use
►
the pressure limiter
7 steps are available
►
Move to the front = valve closed (Position 0)
►
Move to the back = valve opens step by step (max Position 7)
►
Pos 3 is standard
►
If you feel the rear locking move to the front
►
If you miss brake performance in the rear move to the rear
►
10
Detlef Schmidt, I/YM-1, 14.12.2016
Audi RS 3 LMS