3. Control Functions Button Function Operation Power on/off Press and hold for 2 seconds Check battery Press once Power level Press once when music is playing / Play / Pause paused When in AUX mode, press the play / Mute pause button to mute Answer phone Press once when a call is incoming...
4. Charging You can charge the speaker by using the Micro-USB charging cable to connect with any USB power adapter. Please make sure the USB power adapter has a current output of at least 1A. 5. Power On / Off Press and hold the Power Button for 2 seconds to turn the speaker on or off.
Turn on the Bluetooth® function from your device and searching for nearby connections. Select the “VAVA VOOM20” from the search results and tap to connect. The Bluetooth® Indicator will stop flashing and stay on to indicate ...
To switch between the two devices, pause the music on one device and start playing on the other. 9. NFC Connection NFC will let you pair the VAVA Voom20 with another NFC-supported device easily and instantly. Make sure NFC is enabled on your device. ...
Page 9
10. 3.5 mm AUX Connection If Bluetooth ® is not available, you can connect to other music devices via a 3.5 mm AUX cable. Note: When connected in AUX mode, the Bluetooth connection is ® temporarily disabled. The built-in microphone on the speaker will not work with AUX connection.
Ensure the speaker and the connected device is within range and in direct line of sight. Q: I tried to connect to the VAVA Voom20, but my device says “connection failed”? A: Please make sure: ...
7.58 x 2.81 x 2.38 in / Dimensions 19.25 x 7.15 x 6.05 cm 15. Support and Inquiry For further inquiries and technical support, please email us at support@vava.com with details. Or visit our website at www.vava.com. We normally respond to inquiries within 24 hours.
Page 12
EU Importer: ZBT International Trading GmbH, Lederstr 21a, 22525 Hamburg, Deutschland ASIA PACIFIC E-mail : support.jp@vava.com(JP) FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must withstand any interference received, including interference that may cause undesired operation.