Table of Contents
Advertisement
[Digital Output]
Selects the setting based on the digital
ampliÀ er/receiver that is connected through
the digital jack.
•
[Off] - Disables digital output.
•
[PCM] - Downmixs to PCM format (2
channel).
•
[All] - Supports multi-channel audio
formats.
[Volume]
Sets the default volume level when you play
a disc.
1. Press OK .
2. Press
to set the volume.
3. Press OK to conÀ rm and exit.
[Down Sampling]
Selects the output sampling rate for better
sound quality.
•
[On] - for discs recorded at sampling rate
of 48 kHz.
•
[Off] - for discs recorded at sampling rate
of 96 kHz.
[Night Mode]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On] – Enjoys quiet viewing at night.
•
[Off] – Enjoys surround sound with a full
dynamic range.
Note
•
Applicable only to Dolby Digital encoded
DVD.
Video setup
Video Setup
TV System
TV Display
Picture Setting
Component Video
Closed Caption
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press
to select [Video Setup] , then
press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
•
To return to the previous menu,
press .
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[NTSC] – For NTSC-system TV.
•
[PAL] – For PAL-system TV.
•
[Multi] – For TV that is compatible with
both PAL and NTSC.
ConÀ rm the setting by pressing
[Yes] , then press OK .
[TV Display]
Selects one of the following display formats:
SETUP .
to select
EN
21
Advertisement
Table of Contents
