Additional Information; Update Software - Philips DVP3310K/75 User Manual

1. Press OK
2. Select a rating level, then press OK
3. Press the Numeric buttons to enter the password.
Note
•
Rated DVDs above the level you set in
control] require a password to be played.
•
The ratings are country-dependent. To allow all discs to
play, select ' 8'.
•
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
Tip
•
You can set or change the password, go to
> [Password].
[Password]
Sets or changes the password for locked discs and
play restricted DVDs.
Preferences
Change password
Old Password
New Password
Confirm new password
1) Press the Numeric buttons to enter '0000' or
the last set password at [Old Password] fi eld.
2) Enter the new password at [New Password] fi eld.
3) Enter the new password again at [Confi rm new
password] fi eld.
4) Press OK to exit the menu.
Note
•
If you forget the password, enter '0000' before you set a
new password.
[Version Info]
Displays the software version of this DVD player.
16 EN
[Parental
[Preferences]
OK
Tip
•
This information is required when you want to fi nd out if a
newest software version is available at the Philips website
that you may download and install on this DVD player.
[Default]
Resets all the settings of this DVD player to
factory default, except for [Parental control] and
[Password] settings.

8 Additional information

Update software

To check for updates, compare the current software
version of this DVD player with the latest software
version (if available) at the Philips website.
Caution
•
Power supply must not be interrupted during software
upgrade.
Preferences
Audio
Subtitle
Disc Menu
Parental Control
Password
Version Info
Default
1
Press SETUP.
2
Select [Preferences] > [Version Info], then
press OK.
3
Write down the fi le name, then press SETUP
to exit the menu.
4
Visit www.philips.com/support to check for
the latest software version, using the fi le name
for this DVD player.
5
Refer to the upgrade instructions for more
information.
Note
•
Disconnect the power cord for a few seconds and
connect again to reboot the system.