Do you have a question about the HLHD0108B and is the answer not in the manual?
Questions and answers
Summary of Contents for Hollyland-Tech HLHD0108B
Page 1
HDMI 1.4 1x8 Splitter with HDCP User Manual...
Page 2
1. About ■Introduction HDMI 1.4 1x8 Splitter with HDCP can split single ultra HD HDMI input signal to 8 full HD HDMI output signal without compression. Support up to HDMI 1.4b 4K2K video signal, 12-bit deep color, and Dolby True HD/DTS-HD Master audio formats. ■Main features ...
Page 3
■Parameters Interface 1 HDMI input port (Type A-F), 8 channel HDMI output ports (Type A-F), 1 5V DC input port Power consumption <5W Power input 5V DC Dimension (L x W x H): 258 x 112 x 29.5mm Net weight 0.69kg per unit Video bandwidth TMDS clock, up to 340MHz, 10.2Gbps...
Page 4
○ HDMI output port 3; ○ HDMI output port 4; ○ HDMI input port; ○ HDMI output port 5 ○ HDMI output port 6; ○ HDMI output port 7; ○ HDMI output port 8; ○ 5V DC 2A power input; ○...
Page 5
2. Installation ■Installation details and cautions Before installation a) Prepare space for system installing and ensure reliable AC outlet. b) Splitter should be far away from electromagnetic disturbance sources. Such as AC motors, fluorescents, microwave ovens, etc. These disturbance sources might affect video quality. c) Ensure the length of HDMI cable is suitable, no external tensions.
Page 6
3. Operation instruction ■ Getting started After finishing all steps above, system is workable, follow below steps please. a) Ensure the video source and the display terminals are power on. b) Ensure all input, output cables are connected. c) Insert DC IN power adapter into AC plug base, then place power switch to “ON”.
Page 7
4. Trouble shooting ■ Normal problems a) No output on display terminals Check power first, and then check if relative connected ‘HDMI OUT’ ports indicators light. If they don’t light, check HDMI cables between splitter and display terminals. If they light, check ‘Power/VIDEO IN’...
Need help?
Do you have a question about the HLHD0108B and is the answer not in the manual?
Questions and answers