1. Manuals
  2. Brands
  3. Unicomp Labs Manuals
  4. Computer Hardware
  5. ECHO 40F-2R650U
  6. User manual

Unicomp Labs ECHO 40F-2R650U User Manual

Intel core i7/i5/i3 (broadwell-u) slim embedded system high performance, rugged, extended temp, power protection
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Echo 40F
Intel
®
Core™ i7/ i5/ i3 (Broadwell-U) Slim Embedded System
High Performance, Rugged, Extended Temp, Power Protection
USER
USER
Manual
Manual
1.0.0 Edition 20151016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECHO 40F-2R650U and is the answer not in the manual?

Questions and answers

Summary of Contents for Unicomp Labs ECHO 40F-2R650U

  • Page 1 USER USER Echo 40F Manual Manual Intel ® Core™ i7/ i5/ i3 (Broadwell-U) Slim Embedded System High Performance, Rugged, Extended Temp, Power Protection 1.0.0 Edition 20151016...
  • Page 2 Record of Revision Version Date Page Description Remark 0.10 09/25/2015 Preliminary Release 1.00 10/16/2015 Official Release...

  • Page 3: Declaration Of Conformity

    Declaimer This manual is released by . for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product or documentation, nor for any infringements upon the rights of third parties, which may result from such use.

  • Page 4: Order Information

    Order Information Part Number Description ® Echo-40F- Slim Embedded System, Intel Core™ i7-5650U PoER Processor (Broadwell-U), 6 GbE LAN with 4 PoE , 2 Front-access SSD Tray, 4 COM, 6 USB, Isolated DIO ® Echo-40F- Echo-40F- Slim Embedded System, Intel Core™...

  • Page 5: Optional Accessories

    Optional Accessories Part Number Description DDR3L4GW DDR3L 4GB 1333/1066 MHz RAM, Wide Temperature -40°C to +85°C DDR3L8G Certified DDR3L-1600 8G RAM DDR3L4G Certified DDR3L-1600 4G RAM PWA-120W 120W, 24V, 90VAC to 264VAC Power Adapter with 3-pin Terminal Block PWA-120WM4P 120W, 24V, 90VAC to 264VAC Power Adaptor with 4-pin Mini-DIN Connector PWA-160W-WT 160W, 24V, 85VAC to 264VAC Power Adaptor with 3-pin...

  • Page 6: Table Of Contents

    Table of Contents CHAPTER 1 GENERAL INTRODUCTION 1.1 Overview 1.2 Features 1.3 Product Specification 1.3.1 Specifications of Echo-40F-PoER 1.3.2 Specifications of Echo-40F-PoE 1.3.3 Specifications of Echo-40F-2G 1.3.4 Specifications of Echo-40F-2R 1.4 Supported CPU List 1.5 Mechanical Dimensions 1.5.1 Dimensions of Echo-40F-PoER 1.5.2 Dimensions of Echo-40F-PoE 1.5.1 Dimensions of Echo-40F-2G 1.5.2 Dimensions of Echo-40F-2R...
  • Page 7 3.3 Installing Mini PCIe Cards 3.4 Installing Antenna Cable 3.5 Installing CFast Card and SIM Card 3.6 Installing SSD/HDD 3.6.1 Echo-40F-PoE/ Echo-40F-2G 3.6.2 Echo-40F-PoER/ Echo-40F-2R 3.7 Mounting Echo-40F CHAPTER 4 BIOS AND DRIVER SETTING 4.1 BIOS Settings 4.2 Main Menu 4.3 Advanced Function 4.4 Chipset Function 4.5 Boot Function...

  • Page 8: Chapter 1 General Introduction

    GENERAL INTRODUCTION 1.1 Overview Echo-40F Series Slim Embedded System is a new generation compact integrated embedded engine in the market. Powered by leading-edge ® technology, 5th generation Intel Core™ i7/ i5/ i3 U-Series SoC (Broadwell-U) engine, dual DDR3L 1333/ 1600 MHz SO-DIMMs, up to 16GB memory. ®...

  • Page 9: Product Specification

    1.3 Product Specification 1.3.1 Specifications of Echo-40F-PoER System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface Serial 4 COM RS-232/ 422/ 485...
  • Page 10 ® LAN 3 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 4 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 5 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 6 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 Power...

  • Page 11: Specifications Of Echo-40F-Poe

    1.3.2 Specifications of Echo-40F-PoE System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface Serial 4 COM RS-232/ 422/ 485 •...
  • Page 12 ® LAN 3 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 4 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 5 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 ® LAN 6 Gigabit IEEE 802.3at (25.5W/48V) PoE by Intel I210 Power...

  • Page 13: Specifications Of Echo-40F-2G

    1.3.3 Specifications of Echo-40F-2G System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface Serial 4 COM RS-232/ 422/ 485 •...
  • Page 14 Power Power Input 6V to 36V, DC-in Power Interface • 3-pin Terminal Block : V+, V-, Frame Ground • Mini-DIN 4-pin Ignition Control 16 Mode (Internal) Remote Switch 3-pin Terminal Block : On, Off, IGN Surge Protection Up to 80V/1ms Transient Power Others Optional Infineon SLB9665 supports TPM 2.0, LPC Interface...

  • Page 15: Specifications Of Echo-40F-2R

    1.3.4 Specifications of Echo-40F-2R System ® Processor Generation Intel Core™ i7/ i5/ i3 U-Series Processor (Broadwell-U) ® Chipset Intel SoC (Broadwell-U) BIOS IT8786E Memory • DDR3L 1333/ 1600 MHz SO-DIMM, up to 16GB • 2 204-pin SO-DIMM Socket I/O Interface Serial 4 COM RS-232/ 422/ 485 •...
  • Page 16 Power Power Input 6V to 36V, DC-in Power Interface • 3-pin Terminal Block : V+, V-, IGN, Frame Ground • Mini-DIN 4-pin Ignition Control 16 Mode (Internal) Remote Switch 3-pin Terminal Block : On, Off, IGN Surge Protection Up to 80V/1ms Transient Power Others Optional Infineon SLB9665 supports TPM 2.0, LPC Interface...

  • Page 17: Supported Cpu List

    1.4 Supported CPU List CPU Name Cache Max. Frequency Embedded i7-5557U Up to 3.40 GHz i7-5650U Up to 3.20 GHz i7-5600U Up to 3.20 GHz i7-5550U Up to 3.00 GHz i7-5500U Up to 3.00 GHz i5-5287U Up to 3.30 GHz i5-5257U Up to 3.10 GHz i5-5350U...

  • Page 18: Mechanical Dimensions

    1.5 Mechanical Dimensions 1.5.1 Dimensions of Echo-40F-PoER Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) 1.5.2 Dimensions of Echo-40F-PoE Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) GENERAL INTRODUCTION...

  • Page 19: Dimensions Of Echo-40F-2G

    1.5.1 Dimensions of Echo-40F-2G Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) 1.5.2 Dimensions of Echo-40F-2R Unit: mm (inch) 293,8 (11,6) 278,8 (11,0) 293,8 (11,6) 256,8 (10,1) ©Echo-40F User Manual GENERAL INTRODUCTION...

  • Page 20: Chapter 2 Getting To Know Your Echo-40F

    GETTING TO KNOW YOUR Echo-40F 2.1 Packing List Item Description Echo-40F Slim Embedded System (According to the configuration you order, the Echo-40F series may contain SSD/HDD and DDR3L SO-DIMM. Please verify these items if necessary.) Accessory box, which contains ● Drivers & Utilities DVD ●...

  • Page 21: Power Button

    2.2.1 Reset Tact Switch LAN1 LAN2 DVI-D SIM 1 SIM 2 USB 3.0 USB 2.0 RESET CFast POWER It is a hardware reset switch. Use this switch to reset the system without power off the Echo-40F. Press the Reset Switch for a few seconds, then reset will be enabled.
  • Page 22 2.2.3 CFast Card LAN1 LAN2 DVI-D SIM 1 SIM 2 USB 3.0 USB 2.0 RESET CFast POWER There is a CFast socket on the front panel supporting Type-I/ Type-II Compact Flash card. It is implemented by a SATA II Port from Broadwell-U PCH. Be sure to disconnect the power source and unscrew the CFast socket cover before installing a CFast card.
  • Page 23 2.2.4 PWR and HDD LED Indicator LAN1 LAN2 DVI-D SIM 1 SIM 2 USB 3.0 USB 2.0 RESET CFast POWER Yellow-HDD LED: A hard disk/ CFast LED. If the LED is on, it indicates that the system’s storage is functional. If it is off, it indicates that the system’s storage is not functional.
  • Page 24 2.2.7 External USB LAN1 LAN2 DVI-D SIM 1 SIM 2 USB 3.0 USB 2.0 RESET CFast POWER DC-IN 6~36V PoE+ V+ V USB 2.0 Isolated COM1 COM2 PIN 1 ~ 8 PIN 11 ~ 18 COM3 COM4 On | Off LAN4 LAN6 LAN3...
  • Page 25 2.2.9 10/ 100/ 1000 Mbps Ethernet Port LAN1 LAN2 DVI-D SIM 1 SIM 2 USB 3.0 USB 2.0 RESET CFast POWER There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet ® connections in the front side of Echo-40F. LAN 1 is powered by Intel 218LM Ethernet engine;...

  • Page 26: Rear Panel I/O And Functions

    2.3 Rear Panel I/O and Functions 2.3.1 Power Terminal Block DC-IN 6~36V PoE+ V+ V Isolated USB 2.0 COM1 COM2 PIN 1 ~ 8 PIN 11 ~ 18 COM3 COM4 On | Off LAN4 LAN6 LAN3 LAN5 Echo-40F supports 6V to 36V DC power input by terminal block in the rear side.
  • Page 27 2.3.3 Isolated DIO DC-IN 6~36V PoE+ V+ V USB 2.0 Isolated COM1 COM2 PIN 1 ~ 8 PIN 11 ~ 18 COM3 COM4 On | Off LAN4 LAN6 LAN3 LAN5 There is a 16-bit DIO (8-bit DI, 8-bit DO) connector in the rear side.
  • Page 28 GPI SOURCE Mode Digital GPI input signal circuit in SOURCE mode (PNP) is illustrated as follow : GPO SINK Mode Digital GPO output circuit in SINK mode (NPN) is illustrated as follow : GETTING TO KNOW YOUR Echo-40F...
  • Page 29 2.3.4 Serial Port COM DC-IN 6~36V PoE+ V+ V USB 2.0 Isolated COM1 COM2 PIN 1 ~ 8 PIN 11 ~ 18 COM3 COM4 On | Off LAN4 LAN6 LAN3 LAN5 Serial port can be configured for RS-232, RS-422, or RS-485 with auto flow control communication.

  • Page 30: Audio Connector

    2.3.5 PoE (Power over Ethernet) Ports DC-IN 6~36V PoE+ V+ V Isolated USB 2.0 COM1 COM2 PIN 1 ~ 8 PIN 11 ~ 18 COM3 COM4 On | Off LAN4 LAN6 LAN3 LAN5 There are 4 RJ45 connectors in the rear side of Echo-40F. It supports IEEE 802.3at (PoE ) Power over Ethernet (PoE) connection delivering up to 25.5W/ 48V per port and 1000BASE-T gigabit data signals over standard Ethernet Cat...

  • Page 31: Main Board Expansion Connectors

    2.4 Main Board Expansion Connectors 2.4.1 Front View of Echo-40F Main Board With Connector Location BIOS CN15 CN17 CN16 CN19 Battery CON1 CN18 JP10 JP11 2.4.2 Rear View of Echo-40F Main Board With Connector Location PLX-8608 ©Echo-40F User Manual GETTING TO KNOW YOUR Echo-40F...
  • Page 32 2.4.3 J6 Miscellaneous Pin Header This pin header can be used as a backup for following functions, hard drive LED indicator, reset button, power LED indicator, and power-on/ off button, which already can be accessed by front panel and top panel. The pinouts of Miscellaneous port are listed in following table: Group Pin No.
  • Page 33 2.4.4 CON1, J2 LVDS CON1 Echo-40F supports dual-channel 24-bit LVDS display, up to 1920 x 1200 pixels resolution. The pin assignments of CON1 are listed in the following table: Pin No. Definition Pin No. Definition Pin No. Definition PANEL_VDD TXO0- TXOC+ TXE2- PANEL_VDD...
  • Page 34 The LCD inverter is connected to J2 via a JST 7-pin, 2.5mm connector providing +5V/ +12V power to LCD display. The pin assignments are listed in the following table: Pin No. Definition Pin No. Definition +12V +12V LBKLT_EN LBKLT_CTL 2.4.5 CN17, CN19 : SATA III Connector CN17 CN19 There are 2 onboard high performance Serial ATA III (SATA III) on E...
  • Page 35 2.4.6 J1, J3 : SATA Power Connector The E also equip with 2 SATA power connector. It supports 5V (Up to 2A) and 12V (Up to 1A) current to the hard drive or SSD. The pin assignments of J1 and J3 are listed in the following table: Pin No.
  • Page 36 2.4.7 J4 : Internal USB The E main board provide one expansion USB port using plug-and- play for Dongle Key or LCD touch Panel. The USB interface supports 480 Mbps transfer rate which comply with high speed USB specification Rev. 2.0. The USB interface is accessed through one 4-pin JST 2.0mm connector.
  • Page 37 2.4.8 CN18 : Mini PCIe, mSATA CN18 JP11 Both mSATA and Mini PCIe share the same form factor and similar electrical pinout assignments on their connectors. There was no clear mechanism to distinguish if a mSATA drive or a Mini PCIe device is plugged into the socket until recently that SATA I/O issued an ECN change (ECN #045) to redefine Pin- 43 on mSATA connector as “no connect”...
  • Page 38 The pin assignments of CN18 are listed in the following table: Pin No. Signal Name Pin No. Signal Name Reserved +3.3Vaux Reserved Reserved +1.5V Reserved Reserved Status Reserved +3.3Vaux Reserved +3.3Vaux USB_D+ USB_D- PETp0 PETn0 SMB_DATA SMB_CLK +1.5V PERp0 PERn0 +3.3Vaux PERST# Reserved...
  • Page 39 2.4.9 CN16 : Mini PCIe CN16 The pin assignments of CN16 are listed in the following table: Pin No. Signal Name Pin No. Signal Name Reserved +3.3Vaux Reserved Reserved +1.5V Reserved Reserved Reserved +3.3Vaux Reserved +3.3Vaux USB_D+ USB_D- PETp0 PETn0 SMB_DATA SMB_CLK +1.5V...
  • Page 40 PERST# Reserved reserved Reserved Mechanical Key UIM_VPP REFCLK+ UIM_RESET REFCLK- UIM_CLK UIM_DATA CLKREQ# UIM_PWR Reserved 1.5V Reserved WAKE# 3.3Vaux 2.4.10 Battery Battery The E ’s real-time clock is powered by a lithium battery. It is Equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you not replace the lithium battery on your own.
  • Page 41 2.4.11 J5 : LAN2 I210 SDP The pin assignments of J5 are listed in the following table: Pin No. Function Pin No. Function LAN2_SDP0 LAN2_SDP3 LAN2_SDP1 LAN2_SDP2 2.4.12 CN15 : +12V_SB Output CN15 The pin assignments of CN15 are listed in the following table: Pin No.

  • Page 42: Main Board Jumper Settings

    2.5 Main Board Jumper Settings 2.5.1 Front View of Echo-40F Main Board with Jumper Location The figure below is the top view of the E main board which is the main board used in the E Series system. It shows the location of the jumpers.
  • Page 43 2.5.2 JP1, JP2, JP3, JP4 COM 1 to COM 4 Pin 9 Function: Pin No. RI/ +5V/ +12V +12V 2.5.3 JP5 : LVDS Backlight, Power Selection JP5 provides LVDS voltage selection function, closing Pin 1, 2 is for 3.3V LVDS power input;...
  • Page 44 2.5.4 JP6 CMOS/ME CMOS Header Header Normal Normal Clear CMOS Clear ME 2.5.5 JP7 External USB3.0/2.0 Power Select Header Power Header Power +5V Standby Power +5V System Power GETTING TO KNOW YOUR Echo-40F...
  • Page 45 2.5.6 JP9 Internal USB Power Select Internal USB PWR Select: +V5A/ +V5/ +V3.3 +5V Standby +3.3V 2.5.7 JP10 : MCU Spy-bi Wire Interface for Download FW JP10 The pin assignments of JP10 are listed in the following table: Pin No. Function Pin No.

  • Page 46: Ignition Control

    2.5.8 JP8 Backlight Control Level Select Dimming Header On/ Off Header 3.3V 3.3V 2.6 Ignition Control series provides ignition power control feature for in-vehicle applications. The built-in MCU monitors the ignition signal and turns on/ off the system according to pre-defined on/ off delay period. GETTING TO KNOW YOUR Echo-40F...
  • Page 47 2.6.1 Adjust Ignition Control Modes series provides 16-mode adjustable power on/ off delay period via DIP-Switch. The default DIP-Switch is set to 0 in ATX/ AT power mode. The modes are listed in below table: DIP-Switch Power on delay Power off delay Switch Position Position ATX/AT mode...
  • Page 48 2.6.2 Ignition Control Wiring To activate ignition control, you need to provide IGN signal via the 3-pin pluggable terminal block locates in the back panel. Please find below the general wiring configuration. : Positive polarity of DC power input (Car battery+ for 12/24V) : Ground of DC power input (Car battery -/GND line to GND) : Ignition signal input (ACC power of vehicle) For testing purpose, you can refer to the picture blow to simulate ignition signal...

  • Page 49: Chapter 3 System Setup

    SYSTEM SETUP “Please make sure to assemble the system in an anti-static environment.” 3.1 How to Open Your E 3.1.1 Echo-40F-PoE/ Echo-40F-2G Step 1 Remove 5pcs KHS#6-32 screws (circled in red) and 2pcs#4-40 screws (circled in yellow) on the front panel. Step 2 Take off the front panel.
  • Page 50 Step 3 Remove 4pcs F#6-32x6 screws (circled in red) in the bottom side. Step 4 Remove 1pcs KHS#6-32 screw (circled in red) on the rear panel. Step 5 Turn over E to keep the bottom side up. Then do open the bottom cover carefully.

  • Page 51: Echo-40F-Poer/ Echo-40F-2R

    3.1.2 Echo-40F-PoER/ Echo-40F-2R Step 1 Counterclockwise loosen the locks on each SSD/ HDD Tray. Step 2 Remove the SSD/ HDD Tray from E -PoER/ E Step 3 Remove 5pcs KHS#6-32 screws (circled in red) and 2pcs#4-40 screws (circled in yellow) on the front panel. (E -PoER/ -2R) Step 4 Take off the front panel.
  • Page 52 Step 5 Remove 4pcs F#6-32x6 screws (circled in red) in the bottom side. Step 6 Remove 1pcs KHS#6-32 screw (circled in red) on the rear panel. Step 7 Turn over E to keep the bottom side up. Then do open the bottom cover carefully.

  • Page 53: Installing Ddr3L So-Dimm Modules

    3.2 Installing DDR3L SO-DIMM Modules Step 1 Install DDR3L RAM module into SO-DIMM slot. -PoER/ E -PoE/ E -2G/ E -2R) Step 2 Make sure the RAM module is locked by the memory slot. -PoER/ E -PoE/ E -2G/ E -2R) ©...

  • Page 54: Installing Mini Pcie Cards

    3.3 Installing Mini PCIe Cards Step 1 Install Mini PCIe card into the Mini PCIe socket. -PoER/ E -PoE/ E -2G/ E -2R) Step 2 Fasten 2pcs M2.5 screws. -PoER/ E -PoE/ E -2G/ E -2R) HARDWARE INSTALLATION...

  • Page 55: Installing Antenna Cable

    3.4 Installing Antenna Cable Step 1 Check Antenna cable and washers. Step 2 Remove 3pcs rubber cork on rear panel. (Pick up the location you want) © Echo-40F User Manual HARDWARE INSTALLATION...
  • Page 56 Step 3 Put Antenna cable connector into the hole on rear panel. Step 4 Fasten the washer 1, washer 2 and washer 3 on Antenna cable connector. Step 5 Antenna cable is installed ready. HARDWARE INSTALLATION...

  • Page 57: Installing Cfast Card And Sim Card

    3.5 Installing CFast Card and SIM Card Step 1 Remove 2pcs M3x4 Flat head screws on CFast & SIM Card cover on front panel. Step 2 Remove CFast Card and SIM Card cover from front panel. © Echo-40F User Manual HARDWARE INSTALLATION...
  • Page 58 Step 3 Insert CFast card and push to lock. Step 4 Before Inserting SIM card, make sure the system power is not plugged. Step 5 Insert SIM card and push to lock. Step 6 SIM card and CFast card are installed ready. HARDWARE INSTALLATION...

  • Page 59: Installing Ssd/Hdd

    3.6 Installing SSD/HDD 3.6.1 Echo-40F-PoE/ Echo-40F-2G Step 1 Take the bottom cover from E -PoE/ E -2G. (Please refer to 3.1.1) Step 2 Loosen 8pcs M4x4 screws (circled in red) on the bottom cover. Step 3 Remove the SSD/HDD bracket from E bottom cover.
  • Page 60 Step 4 Put 2.5" SSD/HDD into the bracket. Step 5 Fasten 4pcs M3 screws to fix the SSD/HDD on the bracket. Step 6 Fix the SSD/HDD bracket with M3x4 screws. HARDWARE INSTALLATION...
  • Page 61 Step 7 Cable to the SSD/HDD. © Echo-40F User Manual HARDWARE INSTALLATION...

  • Page 62: Echo-40F-Poer/ Echo-40F-2R

    3.6.2 Echo-40F-PoER/ Echo-40F-2R Step 1 Counterclockwise loosen the locks on each SSD/HDD Tray. Then remove the SSD/HDD Tray from E -PoER/ E -2R. Step 2 Fix the SSD/HDD on the SSD/HDD Tray with 2pcs M3x4 Flat head screws. HARDWARE INSTALLATION...
  • Page 63 Step 3 Put the SSD/HDD Tray back. Step 4 Clockwise fasten the locks on each SSD/HDD Tray. © Echo-40F User Manual HARDWARE INSTALLATION...

  • Page 64: Mounting Echo-40F

    3.7 Mounting Step 1 Ensure the screw holes on the right and left side of upper case match the ones on E wallmount bracket. Step 2 Fasten 4pcs KHS#6-32 screws. HARDWARE INSTALLATION...

  • Page 65: Chapter 4 Bios And Driver Setting

    BIOS AND DRIVER SETTING 4.1 BIOS Settings The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI) Flash. The SPI Flash contains the BIOS Setup program, POST, the PCI auto- configuration utility, LAN, EEPROM information, and Serial port support. The BIOS setup program is accessed by pressing the <Del>...

  • Page 66: Main Menu

    4.2 Main Menu Figure 4 2: BIOS Main screen 4.2.1 BIOS Main Menu Figure 4-2-1: BIOS Main screen System Time/ Date Press “TAB” key to switch sub-items of value .Then press “ +” key or “-“ key number key for modify value. In this page, you could make sure CPU type and DRAM type that you installed into this system.

  • Page 67: Advanced Function

    4.3 Advanced Function 4.3.1 ACPI Setting Figure 4-3-1: ACPI Setting setup screen Enable ACPI Auto Configuration This system support ACPI function as auto process. You should Enable/ Disable that depend as your OS. Enable Hibernation It is able to use Hibernate function if OS support. But some OS may not be effective with this function.

  • Page 68: Cpu Configuration

    4.3.2 CPU Configuration Figure 4-3-2: CPU Configuration setup screen Intel Virtualization Technology This for Virtualization Application or platform usage, when enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. BIOS AND DRIVER SETTING...

  • Page 69: Sata Configuration

    4.3.3 SATA Configuration Figure 4-3-3 : SATA Configuration setup screen SATA Controller(s) Enables or Disables integrate SATA controller for storage devices. SATA Mode Selection Determines how the SATA transfer mode for operate. Here have three option for choice [IDE] / [AHCI] / [RAID]. For the RAID mode operate, please see appendix E.

  • Page 70: Amt Configuration

    4.3.4 AMT Configuration Figure 4-3-4: AMT Setup screen Intel AMT ® Enables or Disables Intel Active Management Technology BIOS extension. This option just controls the BIOS extension executes. BIOS AND DRIVER SETTING...

  • Page 71: Serial Port 1 Configuration

    4.3.5 Serial Port 1 Configuration Figure 4-3-5 : Serial Port 1 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...

  • Page 72: Serial Port 2 Configuration

    4.3.6 Serial Port 2 Configuration Figure 4-3-6 : Serial Port 2 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO addresses and interrupts resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...

  • Page 73: Serial Port 3 Configuration

    4.3.7 Serial Port 3 Configuration Figure 4-3-7 : Serial Port 3 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...

  • Page 74: Serial Port 4 Configuration

    4.3.8 Serial Port 4 Configuration Figure 4-3-8 : Serial Port 4 Setup screen Serial Port Enable or Disable Serial Port. Device Setting Current IO address and interrupt resource of Serial Port. Change Settings Select another device setting. There are 6 options as follow : •...

  • Page 75: Chipset Function

    4.4 Chipset Function Figure 4-4: Chipset Function Setup screen 4.4.1 WOL Configuration Figure 4-4-1 : Network Setup screen PCH LAN Controller Enable or Disable on board network device. Wake on LAN Enable or Disable integrated LAN to wake the system. This function also can active by O.S.

  • Page 76: Boot Function

    4.5 Boot Function Figure 4-5: Boot function Setup screen 4.5.1 Boot Option Figure 4-5-1 Boot Option Setup screen Boot option When you press “Enter”, you can select which device you would like to boot. BIOS AND DRIVER SETTING...

  • Page 77: Appendix A : Isolated Dio Guide

    APPENDIX A : ISOLATED DIO GUIDE A.1 I/O Pin Definition I/O Pin Base Adr Usage GPIO 10~17 0xA00 CN16-GPIO GPIO 20~27 0xA01 DIO Output GPIO 30~37 0xA02 ----------- GPIO 40~47 0xA03 ----------- GPIO 50~57 0xA04 DIO Input GPIO 60~67 0xA05 CN16-GPIO A.2 Function Description The E...
  • Page 78 EXT_IN5 GPIO Input 5 EXT_OUT5 GPIO Output 5 EXT_IN6 GPIO Input 6 EXT_OUT6 GPIO Output 6 EXT_IN7 GPIO Input 7 EXT_OUT7 GPIO Output 7 DI_COM GPIO COM Reserved EGND GPIO GND E24V External 24V DC Signal Circuit of Input NPN Digital GPIO input signal circuit in SINK mode (NPN) is illustrated as follow.
  • Page 79 A.3 Software Package There are 2 folders inside : Driver Folder DIO Demo Tool Folder A.4 Driver Installing Supports Windows 8.1 and Windows 7. Please do make sure your OS version before installing. Please select “Add legacy hardware” on device management Appendix A ©...

  • Page 80: Appendix B : Gpio And Wdt Functions

    APPENDIX B : GPIO and WDT Functions B.1 Function Description The WDT are using internal Super I/O function. However, you must entry super I/O configuration mode to set it. Super I/O special address port = 0x2E Super I/O special data port = 0x2F GPIO Logical device is 0x07 B.2 Entry Functions 1.

  • Page 81: Appendix C : Power Consumption

    APPENDIX C : Power Consumption Echo-40F Power Consumption Testing : Echo-40F Storage- Aux card CFast Storage- Transcend SSD370 SATA Aux card SATA 0 SSD 64GB Storage- Power Chroma 62006P-100-25 SATA 1 Source Power Source : Standby Mode Input Power Max Current Max Consumption i7-5650U 4GB X 2...
  • Page 82 Power-on and boot to Win7 64-bit Idle Status : Run 100% CPU usage CPU usage less 3% Current Consumption Current Consumption i7-5650U 2.200A 13.20W 3.600A 21.60W i7-5650U 1.430A 12.87W 2.250A 20.25W i7-5650U 1.070A 12.84W 1.610A 19.32W i7-5650U 0.610A 14.64W 0.900A 21.60W i7-5650U 0.530A...
  • Page 83 No part of this publication may be reproduced in any form or by any means, electric, photocopying, recording or otherwise, without prior authorization of the publisher. The rights of all the brand names, product names and trademarks belong to their respective owners. © Unicomp Labs, INC. 2015. All rights reserved.

This manual is also suitable for:

Echo 40fpoe350uEcho 40f-2g650uEcho 40f-2g350uEcho 40f-2r350uEcho 40fpoe650uEcho 40f-poer350u ... Show all

Table of Contents