Advertisement
Factory Settings
Your light is configured at the factory with the following settings:
- Maximum setting: maximum brightness level (30 minutes runtime*)
- Primary setting: 10 lumens (10 hours runtime*)
- Secondary setting: 30 lumens (2.0 hours runtime*)
- Minimum setting: 0.3 lumens (40 hours runtimes*)
- Force Setting: Primary setting
- Locator Flash: disabled
- Automatic Button Lock: disabled
- Automatic Turn Off: disabled
- Simple Momentary: disabled
- Tactical Momentary: disabled
- Ramping and Option Menu: enabled
* Runtimes using Duracell CR123A at 35°C for the 60 lumen model. Runtimes for the
three lower power setting will typically be better on higher power models.
Battery configurations supported by the LED module:
Primary cells - non-rechargeable:
• Alkaline: 2 cells (3.3V) – reduced high power performance
• Li-FeS2: 2 cells (3.3)
• Li-MnO2: 1 cell (3.2V)
• Li-SOCl2: 1 cell (3.6V)
Secondary cells - rechargeable:
• Li-ion: 1 cell (4.2V)
• NiCad: 2 cells (2.5V)
• NiMH: 2 cells (2.6V)
Specifications are subject to change without notice.
Advertisement
