3.3. TEST SET CALIBRATION ..............8 SECTION IV ................9 WARRANTY TEST SETS ............9 Figures FIGURE 1. ULTRASONIC TEST SET MODEL TS200 ......5 FIGURE 2. TESTING BEACON ..............7 Tables TABLE 1. TS200 ULTRASONIC TEST SET SPECIFICATIONS ....5 03-TM-0045 REV 00...
GENERAL INFORMATION 1.1. INTRODUCTION 1.1.1. GENERAL. This manual contains the description, operation and maintenance of the TS200 Ultrasonic Test Set manufactured by Dukane Cor- poration, Seacom Division, 2900 Dukane Drive, St. Charles, Illinois 60174. See Figure 1. 1.1.2. SYMBOLS AND ABBREVIATIONS. All symbols and abbrevia- tions used in this manual are in accordance with the ANSI Y14.15 and...
TABLE 1. TS200 ULTRASONIC TEST SET SPECIFICATIONS Size........3.3" (8.4 cm) x 6.5" (16.5 cm) x 1.2" (3.0 cm) Weight......…13 ounces (368 grams) Battery*........9V * NEDA Type 1604A. Figure 1. Ultrasonic Test Set Model TS200 Page 5 of 9 03-TM-0045 REV 00...
D. Operational Test. Place the probes on the beacon as described above and press the red button on the TS200 (the test set display will be blank during this operation). The beacon should activate and a pinging sound will be audible from the TS200.
3.3. TEST SET CALIBRATION 3.3.1 The TS200 Test Set is calibrated at the factory during manufacture. Under normal operating conditions the test set will not require calibration for a period of one year.
SECTION IV WARRANTY TEST SETS Dukane Corporation warrants that the Test Set (referred to as the unit) will be free from defects in materials and workmanship, when used under normal operating conditions as determined solely by Dukane Corporation, for a period of one (1) year from the date of shipment from Dukane Corporation.
Need help?
Do you have a question about the TS200 and is the answer not in the manual?
Questions and answers