Summary of Contents for ONV PSE3101AC
- Page 1 USER GUIDE POE & Optical Transmission International Standard Intelligent POE injector...
- Page 2 Statement Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd All Rights Reserved This document contains proprietary information that is protected by copyright. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
-
Page 3: Product Overview
Product overview Product Introduction ONV’s POE injectors completely abide by IEEE802.3af/IEEE802.3at/LTPoE++(super hight power) protocols, 15.4watts/30watts/95watts as port output maximum power . Basing on the existing network interface and no need change anything, using a Cat5 & Cat5e UTP and more advanced UTP to supply the power source to small-power network devices, meanwhile and offering data transmission . - Page 4 Technical Structure and Port Description Single-port POE injector Single-port POE injector 4-port POE Mid-span injector AC power input type DC power input type 195mm 25mm 44mm Power Sourcing Equipment Power over Ethernet midspan injectoe 4 ports Ethernet 80mm 279mm 76mm Ethernet AC 220V 50Hz A.Ethernet input RJ45 port...
-
Page 5: Indicator Description
Indicator description: Description Indicator Status Working Power indicator: P Power off Connected PD device, working properly PoE indicator: PoE Blink Short circuit or Current overload (Green LED) No connected PD device or No power supply Note: 1)Please make sure that powered devices conforms to IEEE802.3af/at 2)PoE injector that supports LTPoE++ high power standard can achieve super high power supply function Connect to power Smart managed PoE switch adopts AC 100-240V, 50/60Hz. - Page 6 Installation guide Please install with the supporting devices. Installation Please confirm the following things before installation: 1. Whether POE port power supply power meet the power requirement of the connected devices or not . 2. Whether the POE standard requirements and power supply mode match with the powered devices or not , Mid-span : 4,5+;...
-
Page 7: Connection Diagram
Connection Diagram... - Page 8 Model description with details PSE3101AC: single-port 10/100Mbps POE injector , singe port supports POE IEEE802.3af, AC110-245V input , POE port output power : 15.4watts, total power : 16watts. PSE3101AC-at: single-port 10/100Mbps POE injector , singe port supports POE IEEE802.3at ,AC110-245V input , POE port output power : 25.5wattstotal power : 30watts.
Need help?
Do you have a question about the PSE3101AC and is the answer not in the manual?
Questions and answers