ASSIST & TRANSIT USER MANUAL TABLE OF CONTENTS Key Specifications List of Components Assembly & Use Troubleshooting Care & Maintenance Warnings Warranty Compliance Service Maintenance & Customisation ...
Page 2
Thank you for choosing this OSD Aspire wheelchair. This product has been designed to offer the maximum in comfort, safety and adjustability. OSD Aspire steel wheelchairs are suitable for indoor and outdoor use and are available in a range of sizes.
3. ASSEMBLY & USE Open the carton carefully. DO NOT USE a box cutter or sharp implement as this may damage the product. For OH&S, lay the carton on its side with the top of the carton open and slide the plastic bag out containing the wheelchair.
4. TROUBLESHOOTING Wheelchair is steering/pulling to one side • Make sure the rear wheels axle pins have been inserted correctly • Make sure the end user is able to evenly distribute his/her weight on the wheelchair • Make sure one push rim has not been mounted more tightly than the other •...
• Wheels are functioning wear on front castors completed by • Forks properly • Check for signs of authorised Aspire • Axles wear on rear tyres service agent • Armrest receivers • Seat sling • Footrest mounts CARE FOR YOUR CHAIR •...
Aidacare immediately to determine if warranty conditions apply and organise repair and/or replacement as applicable. 8. COMPLIANCE The Aspire wheelchair range is manufactured in ISO compliant production facilities to strict quality control standards. As part of Australian Standards compliance, safety stickers are located on the frame of this wheelchair.
SPARE PARTS Aidacare stock replacement parts for the Aspire wheelchair range. All replacement of parts should be completed by Aidacare or authorized Aspire service technician. The term parts includes but is not limited to: tyres, tubes, brakes, armrests, footrests and upholstery.
Page 12
Imported by: AIDACARE P/L | 4 Noonan Rd, Ingleburn NSW 2565 T – 1300 133 120 | W – www.aidacare.com.au MADE IN CHINA...
Need help?
Do you have a question about the ASSIST and is the answer not in the manual?
Questions and answers