Download Print this page

Cartft picoPSU-150-XT Quick Installation Manual

12v, 150watt, 24pin atx power supply

Advertisement

Quick Links

picoPSU-150-XT
12V, 150Watt, 24pin ATX Power Supply
Quick Installation Guide
Version 1.0a
P/N picoPSU-150-XT
Introduction
The picoPSU-150-XT is a small yet powerful and fully compliant ATX power
supply designed to power a wide variety of motherboard from a single 12V
regulated power source.
The PICOPSU-150-XT is the only snap power supply solution for general
purpose motherboards. Compatible with an entire range of mini-ITX, UATX or full
size ATX motherboards the picoPSU-150-XT provides cool, silent power for
system. The PICOPSU-150-XT has many advantages over a regular power
supply:
-Smallest 24 pin ATX PSU to date
-100% silent operation
-Low heat dissipation with efficiency over 95%
-Plugs directly into the motherboard's power connector, no cable mess
-Solid Capacitor design, very long life design.
-12V Aux power connector designed to support processors with TDP of 35 or
65Watts.
nd
-2
HDD power harness connector.

Advertisement

loading

Summary of Contents for Cartft picoPSU-150-XT

  • Page 1 Version 1.0a P/N picoPSU-150-XT Introduction The picoPSU-150-XT is a small yet powerful and fully compliant ATX power supply designed to power a wide variety of motherboard from a single 12V regulated power source. The PICOPSU-150-XT is the only snap power supply solution for general purpose motherboards.
  • Page 2 3) Turn on the PC using the motherboard ON/OFF switch Typical configuration The picoPSU-150-XT has been tested with all mini-ITX board under virtually any disk/floppy/CDROM/PCI configuration. Additionally, the PICOPSU-150-XT can power boards that require 4 pin 12V aux power connector to be used with processors with TDP ranging from 35 to 65watts.
  • Page 3 CarTFT.com ATX DC-DC Converter Series Specifications, picoPSU-150-XT, 150Watts DC-DC ATX Power Supply Power Ratings (max load = 150watts) Volts Max Load Peak Regulation % Load (A) +/- 1.5% 5VSB 1.5A +/- 1.5% 3.3V +/- 1.5% -12V 0.05A 0.1A +/- 5%...
  • Page 4 T(psu) does not exceed 65C. Higher temperatures are allowed, but MTBF could decrease. Maximum power supply body temperature T(psu) is 85C. Relative Humidity: 10 to 90 percent, non-condensing. Efficiency, MTBF: 95%. MTBF=100K hours at T(PSU) 55Celsius. picoPSU-150-XT Quick Installation Guide Page 4...