Arctic Accelero Hybrid III-120 Welcome Manual

Water cooling solution for the gpu with 120 mm radiator

Advertisement

Quick Links

Accelero Hybrid III-120
Dear Customer,
Thank you for choosing the Accelero Hybrid III-120.
We at ARCTIC work hard to push the boundaries in gaming further and
with the Accelero Hybrid III-120 we certainly do so. In order to be multi-
compatible, we cool the RAM through a back-plate and have several
VR cooling sets covering all high-end boards. This makes the
unparalleled water cooling performance available for everyone.
In order to assist you better, we launched a support platform for
Smartphones (support.arctic.ac).
I hope you enjoy this GPU cooler and we at ARCTIC look forward to
further enriching your life with our products. If you would like to share
h o w y o u u s e A R C T I C ' s p r o d u c t s p l e a s e d o s o a t
https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your support helps us to
compensate every kilogram of CO we produce. Thank You.
Sincerely,
Magnus Huber
ARCTIC CEO

Accessories

Spring x 4
VRM Fan x 1
E
Radiator accessories
Screws x 4
VRM heatsink accessories
Dedicated VRM cooling
x 4
Welcome Guide
support.arctic.ac/h3-120
Screws x 4
Screws Black
(8 mm)
x 4
L
x 2 or x 3
EN
DE
FR
ES ...
2
Washer x 4
Heatsink x 1
Screws Black
(5 mm)
x 4
Generic
x 5
x 14
K
x 1
www.arctic.ac
MX-4 x 1
Spacers Black
(1.25 mm)
x 4
Thermal
N
Adhesive (3g)
L
M
x 1
x 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Accelero Hybrid III-120 and is the answer not in the manual?

Questions and answers

Summary of Contents for Arctic Accelero Hybrid III-120

  • Page 1 Thank you for choosing the Accelero Hybrid III-120. We at ARCTIC work hard to push the boundaries in gaming further and with the Accelero Hybrid III-120 we certainly do so. In order to be multi- compatible, we cool the RAM through a back-plate and have several VR cooling sets covering all high-end boards.
  • Page 2 GeForce GTX 580, 570, 480, 470, 465 Note: This table is for reference only. Please refer to your actual Graphics card holes position during installation. Updated information is available at support.arctic.ac/h3-120 Apply thermal compound Apply thermal compound MX-4 x 1...
  • Page 3 Tear off the protective film Tear off the protective film Heatsink x 1 Assemble heatsink and pump Assemble heatsink and pump Screws x 4 Washer x 4 Spring x 4 Tightening sequence 1 2 3 4 25% Increments Increments until fully fastened until fully fastened...
  • Page 4 Installation of VRM heatsink (e.g. GTX 980) 1 Install the fan onto the VRM heatsink Install the fan onto the VRM heatsink VRM Fan x 1 Tear off the protective film Tear off the protective film Assemble the VRM heatsink Assemble the VRM heatsink...
  • Page 5 Installation of generic VRM heatsink (e.g. GTX 680) Hot component areas Locate the heatsinks For reference only Tips of applying thermal adhesive Squeeze out all the glue with pliers. Since the thermal adhesive can be applied once only, fit the cooler to the card with the heatsinks accurately positioned before you apply the thermal adhesive.
  • Page 6 Installation of VRM heatsink (e.g. HD 7870 GHZ) Hot component areas Locate the heatsinks For reference only Installation of radiator 4 Choose air flow direction Choose air flow direction b. Air Exhaust a. Air Intake...
  • Page 7 5 Choose radiator direction Choose radiator direction Your Accelero Hybrid is filled with water, some air bubbles are present in the circuit to allow it to work properly. During transportation, air bubbles might find their way to the water pump and while functioning create hissing or bubbling noise.
  • Page 8 ARCTIC (HK) Ltd. In no event shall ARCTIC, its directors or employees be liable for any indirect damages, incidental or...

Table of Contents