Parts List Inventory all parts prior to table assembly. *Contains small parts – Choking hazard. Player Rods Players Stoppers, Bolts, and Lock Nuts 2 - 40” 5 Player rods 11 - Blue players 4 - Stoppers 4 - 45” 3 Player & goalie player rods 11 - Red players 4 - .875”...
Page 3
Make sure dowels and panels are tight before screwing surface and PVC panels in place. Surface holes are already pre-drilled. Use 20 – 1” screws for attaching surface and PVC panels Diagram 1b. Attach legs using 4 – ¼” x 2-3/4” lag bolts (per leg). Line up legs with the mounting holes.
Page 4
Ball Drop Cup Installation Using the 3 screws, align the ball drop cup with the pilot holes on the game table and tighten screws. Repeat for opposite side. Score Bar Installation Place score bars in pre-drilled end panel holes. Secure with screws. Game Table Leveling Adjust footers as needed to level table.