Samsung HL-R4667W Service Manual page 120

www.freeservicemanuals.info
12-1-2 Separation of the Analog and Digital Board
Part Name
Analog
① Seperate the cables.
Board
: The 30 pin shield cable should be removed by holding the
two lock ends of the cable, as failing to do so, could damage the
connector.
① Remove the 5 screws
: PWH,B,M3,L10,ZPC(YEL),SWRCH18A
Fan
① Remove both the connector and the screws before removing
the fan. Then remove the fan from the holder chassis.
: PWH,B,M3,L10,ZPC(YEL),SWRCH18A
Analog
① Analog, Digital Board and Fan.
Board/
Digital
Board/
Fan
Samsung Electronics
Description
Published in Heiloo, Holland.
Disassembly & Reassembly
Description Photo
9/13/15
12-3