Summary of Contents for HERA PROCOLOR 35 RGB SERIES
Page 1
We thank you for your custom. Please note that this product, as all the others in the rich HERA range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for future reference.
• Any non-compliance of the Installation Guide will void the Hera warranty. Warranty Hera warrants the products for a period of three (3) years from date of purchase, provided that the purchased items are used under the conditions stated in this user manual.
PROCOLOR 35 RGB SERIES Explanation Procolor® 35RGB has 18 high powered led within itself. It consumes 35 Watt energy and generates 1218 lumen light. It has options such as Narrow, Middle and Wide angle. Even though it is small, it is a leading product in its class with high light power. It is controlled with 3 Channel DMX.
PROCOLOR 35 RGB SERIES Block Diagram Indoor Zone Any device which supports Art-Net to DMX 512 or USB Interface Art-Net LUNA8 ETHERNET DMX IN DMX OUT POWER 90~264VAC 50/60HZ Please Check MADRIX Web Site Minimum Computer System Requirements UL / cUL Max.in Chain 32 pcs...
PROCOLOR 35 RGB SERIES Connection Diagram Connection Diagram Insert the connector into the appropriate input and screw the conection TURN The correct type of connection as shown at figure Blue DMX (-) Blue DMX (-) White DMX (+) White DMX (+)
PROCOLOR 35 RGB SERIES Installation Instruciton Installation Instruction Step Description Assemble leg of luminaries to wall or ground as shown at figure 1 Synchronize the gear with surface of luminaries and leg as shown at figure 2 Turn the luminaries into the suitable position as shown at figure 3 Tighten the screw as shown at figure 4...
Page 7
PROCOLOR 35 RGB SERIES Installation Instruciton Installation Instruction Step Description Screw leg of luminaries to pile as shown at figure 1 Luminaries pile into soil as shown at figure 2 Loosen the screw as shown at figure 3 Turn the luminaries into the suitable position as shown at figure 4 Tighten the screw as shown at figure 5...