Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Argos JS-HF-55Z
Summary of Contents for Argos JS-HF-55Z
-
Page 1: Instruction Manual
350W JIGSAW INSTRUCTION MANUAL JS-HF-55Z ORIGINAL INSTRUCTIONS... -
Page 2: General Power Tool Safety Warnings
ORIGINAL INSTRUCTIONS GENERAL POWER TOOL suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk SAFETY WARNINGS of electric shock. WARNING: Read all safety f) If operating a power tool in a damp warnings and all instructions. location is unavoidable, use a residual Failure to follow the warnings and current device (RCD) protected... - Page 3 ORIGINAL INSTRUCTIONS hazards. b) If the replacement of the supply cord is necessary, this has to be done by 4) POWER TOOL USE AND CARE the manufacturer or his agent in order a) Do not force the power tool. Use to avoid a safety hazard.
- Page 4 ORIGINAL INSTRUCTIONS SYMBOLS additional protection against a possible electrical insulation failure within the tool. To reduce the risk of injury, 13.Always check walls, floors and ceilings user must read instruction to avoid hidden power cables and pipes. manual 14.After long working period, external metal parts and accessories could be hot.
-
Page 5: Component List
ORIGINAL INSTRUCTIONS COMPONENT LIST Lock button On/off switch Contact protector Saw blade Inclination guide Base plate Dust extraction outlet Blade holder HELPLINE NO 08454 505299... -
Page 6: Technical Data
ORIGINAL INSTRUCTIONS TECHNICAL DATA Voltage 230-240V~50Hz Power 350W Rated speed 3000/min Max. cutting capacity Wood 55mm Steel Bevel capacity ±45° Protection class Machine weight 1.4kg NOISE INFORMATION A weighted sound pressure 89dB(A) A weighted sound power 100dB(A) & K 3dB(A) Wear ear protection when sound pressure is over 80dB(A) VIBRATION INFORMATION... - Page 7 ORIGINAL INSTRUCTIONS Helping to minimise your vibration exposure risk. Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate). If the tool is to be used regularly then invest in anti vibration accessories. Avoid using tools in temperatures of 10 C or less.
-
Page 8: Operating Instructions
ORIGINAL INSTRUCTIONS OPERATING INSTRUCTIONS c) Tighten the clamp screw using the hex key. NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. It is suitable for straight and curved cuts. - Page 9 ORIGINAL INSTRUCTIONS Maintenance and Cleaning b) Bevel or angle cutting •Before any work on the machine itself remove To adjust the base to the desired angle the plug from the mains socket. (refer to the description on Page 8. Mark •Always keep the machine and ventilation slots the cutting line on the work piece (good clean.
-
Page 10: Plug Replacement
ORIGINAL INSTRUCTIONS Further advice on usage or faults is available by contacting the service centre on 08454 505299. PLUG REPLACEMENT Your Power Tool is supplied with a fitted plug, however if you need to fit a new plug follow the instruction below. IMPORTANT The wires in the mains lead are coloured in accordance with the following code:... - Page 11 ORIGINAL INSTRUCTIONS DISPOSAL Do not dispose of electrical appliances with your domestic waste! The packaging comprises exclusively environmentally- friendly material. Dispose of it in your local recycling containers. General inspection. Regularly check that all the fixing .They may vibrate loose over time. GUARANTEE This product is selected for DOMESTIC USE ONLY and not for business use.
-
Page 12: Ec Declaration Of Conformity
We hereby certify that the product stipulated above complies with all the relevant provisions of the following EC new approach directive/s. This declaration of conformity is issued under the sole responsibility of the manufacturer Type of Product: 350W JIG SAW Model Number: JS-HF-55Z Cat / Article Number:7110948 Product Description: Photograph:...
Need help?
Do you have a question about the JS-HF-55Z and is the answer not in the manual?
Questions and answers