Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
1100 POUND CAPACITY
MOTORCYCLE / ATV LIFT
MODEL:
RML-1100
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the purchaser
upon receipt from the carrier. Consequently, claims for the
material damaged in shipment must be made by the purchaser
against the transportation company at the time shipment is
received.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT
YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual .
BE SAFE
Your new lift was designed and built with safety in mind.
However, your overall safety can be increased by proper
training and thoughtful operation on the part of the
operator. DO NOT operate or repair this equipment
without
reading this manual and the important safety
Instructions shown inside.
REV A 04-16-10
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.bendpak.com
www.rangerproducts.com
Advertisement
Table of Contents
Related Manuals for Ranger Products RML-1100
Summary of Contents for Ranger Products RML-1100
- Page 1 REV A 04-16-10 INSTALLATION AND OPERATION MANUAL 1100 POUND CAPACITY MOTORCYCLE / ATV LIFT MODEL: RML-1100 Keep this operation manual near the machine at all times. Make sure that ALL USERS read this manual . SHIPPING DAMAGE CLAIMS BE SAFE When this equipment is shipped, title passes to the purchaser Your new lift was designed and built with safety in mind.
- Page 2 Ranger Products Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. Ranger Products Inc. will pay labor costs for the first 12 months only on parts returned as previously described.
- Page 3 IMPORTANT NOTICE OWNER’S RESPONSIBILITY To maintain the lift and user safety, the responsibility of Do not attempt to install this lift if you have never been the owner is to read and follow these instructions: trained on basic automotive lift installation procedures. Never attempt to lift components without proper lifting Follow all installation and operation instructions.
- Page 4 5. ONLY TRAINED OPERATORS should operate this lift. All non-trained personnel should be kept away from work BendPak Inc. / Ranger Products area. Never let non-trained personnel come in contact with, operate lift. 1645 Lemonwood Dr.
- Page 5 RML-1100 MAINTENANCE INSTRUCTIONS 1. When not in use, the lift must be stored in the lowest position in a dry location. UNPACKING AND SET-UP 2. Keep the lift clean and wipe off any oil or grease. 1. Carefully open packaging and inspect the lift for Lubricate all moving parts.
- Page 6 Safe Lift Operation Motorcycle lifts are critical to the operation and profitability of your business. The safe use of this and other lifts in your shop is critical in preventing employee injuries and damage to customer’s vehicles. By operating lifts safely you can insure that your shop is profitable, productive and safe.
- Page 7 RML-1100 Item # Description Item# Description Platform Washer M20 Bolt M12×50 Outside lifting arm Washer M12 Connect pin Saddle Middle bush Adjustable plate Inside frame roller Bolt M10×25 Inside lifting arm Handle Bearing Lifting screw Outside fi xed spindle Inside fi xing spindle...
- Page 8 For Parts Or Service Contact: BendPak Inc. / Ranger Products 1645 Lemonwood Dr. Santa Paula, CA. 93060 Tel: 1-805-933-9970 Toll Free: 1-800-253-2363 Fax: 1-805-933-9160 www.bendpak.com www.rangerproducts.com...
Need help?
Do you have a question about the RML-1100 and is the answer not in the manual?
Questions and answers