Precaution Thank you for purchasing this electronic instrument.For perfect operation and security, please read the manual carefully and keep it for future reference. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient...
Contents Panel Controls... Assembly Instruction ... Connect... Connecting the Power Supply... Connecting a CD Player, etc.(AUX In jack)... USB MIDI... Connecting Headphone Start to Play the Drum ... Switch the Power On ... Set the Master Volume ... Select Drum Kits ... KIT Button ...
Panel Controls Top Panel Rear Panel CONNECT SNARE TO BASE RIDE CRASH HI-HAT AUX IN PHONES 11 12 Back Panel of bottom case 14 15 POWER CONNECT DC 9V TO MODULE...
Page 5
Panel Controls Top Panel 1.MASTER VOLUME This is used to adjust LINE OUT volume, headphone volume and LINE IN volume. 2.[TEMPO/TAP] Button This button is used to change the song's tempo and metronome tempo, allows you to tap the tempo on the pad to change the song's tempo.
Page 6
Panel Controls Real Panel CONNECT TO BASE This jack is used to connect the module to Back Panel of bottom case. 9.Trigger Input Jacks These jacks are used to connect the pads to the Module. (HI-HAT, RIDE, CRASH, SNARE) 10.USB This is USB MIDI jack.
Page 7
Assembly Instruction Take out the bottom case from the packing case, insert the drum stand into the bottom case as shown in the figure and tighten the T-screw. Take out the module and three Tom pads from the packing case, insert them into drum stand as shown in the figure and tighten the T-screw.
Assembly Instruction Assemble Hi-Hat cymbal as shown in the figure and tighten the T-screw. Take out Snare pole from the packing case, insert it into drum stand as shown in the figure and tighten the T-screw. Take out Snare pad from the packing case, insert it into Snare pole as shown in the...
Page 9
Assembly Instruction Hi-Hat Foot Controller ---It can produce hi-hat closed sound if you hit hi-hat when pressing foot controller. ---It can produce hi-hat open sound if you hit hi-hat without pressing foot controller. ---Press foot controller directly to produce hi-hat pedal sound. ---The hi-hat tone changes smoothly from open to closed in response to press the pedal while hitting the hi-hat.
Connect Connecting the Power Supply AC POWER Make sure the power is switch OFF and connect the power adaptor to the DC 9V jack on the rear panel. Connecting a CD Player, etc. (AUX In jack) The audio output from a CD player connected to the AUX IN jack on the rear panel can be mixed with the sound of the drum brain.
Start to Play the Drum Switch the Power On After confirming that each of the devices, pads, external devices, etc. are all properly connected, turn the power on. The drum module is ready to operate when the display shown below, for selecting the drum kit.
Start to Play the Drum 1. Selecting Voice Press [KIT] button and [REC/PLAY] button,then hit the pad , use [+] [-] to select the Voice . For example:to select TOM1 voice. Press [KIT] button and [REC/PLAY] button,LED displays current drum number . then hit the TOM1 LED displays t1 ,then LED displays TOM1 instrment .
Start to Play the Drum b. Click Sound CLICK on, press[click] button and use [+] or [-] button to select click sound. default: 001-003. c. Click Volume CLICK off, press [CLICK] button and use [+]or[-]button to select click volume,range:000-032. [REC/PLAY] Button a.
Start to Play the Drum [SONG] Button Your drum provides 10 preset songs and 1 Demo. Press [SONG] and [KIT] button to start or stop the song. a.Drum On/Off In [SONG] mode, press [SONG] button 2 seconds, LED displays oN or oFF On------turn on the percussion track of the song.
Start to Play the Drum [TEMPO/TAP] Button Tempo function, you can adjust tempo by using [TEMPO/TAP] button. Press [TEMPO/TAP] button ,LED displays current tempo, use [+] or [-] button to adjust tempo value. Range: 020-240 Press [TEMPO/TAP] button 2 seconds to enter the TAP mode , LED displays will flash , Tap on the pad 4 times to change the tempo also.
Factory Set Turn off the power. Hold down [+] and [-] buttons, then turn the power on, it can restore all internal settings to factory set. a.Reseting Turn off the power. Hold down [KIT] buttons, then turn the power on to enter setup mode: Press [TEMPO/TAP] button ,use[+]or [-]button to set sensitivity.
MIDI Implementation Chart Function Transmitted Recognized Remarks Basic Default 1-16 1-16 Memorized 1-16 each 1-16 each Channel Changed Mode Default Mode 3 Mode 3 Messages Altered Note 0~127 0~127 Number True voice 0~127 Velocity Note ON O 99H,v=1~127 O 9nH,v=1~127 Note OFF O 89H,v=0 O 8nH,v=0 or 8nH...
Need help?
Do you have a question about the TD36 and is the answer not in the manual?
Questions and answers