Tv System (Ntsc/Pal), Black Level Shift - Philips DVDQ50 Owner's Manual

16 TV System (NTSC/PAL), Black Level Shift

TV System (NTSC/PAL)
Switch the NTSC/PAL setting of the DVD Player to match the
color system of your TV. Most TVs in the United States use the
NTSC color system. If your TV uses NTSC, set the DVD Player
to NTSC. Discs you play should have the same color system
(NTSC or PAL) that you chose for the DVD Player and TV. To
change the DVD Player's NTSC/PAL setting, follow these steps.
1
Press SYSTEM MENU.
2
Press 9 to select
3
Press 9 repeatedly to select TV System, then press :.
4
Press 8 or 9 to choose PAL, NTSC, or Auto. Choose Auto
only if your TV has both NTSC and PAL and you are using the
(CVBS) VIDEO OUT jack.
5
Press SYSTEM MENU to remove the menus.
You may need to turn off the DVD Player, then turn it on again,
before your NTSC/PAL changes take effect.
Black Level Shift
If you set the DVD Player to NTSC, set Black level shift to On.
This will improve the color contrast during Disc playback. Black
level shift has no effect if the DVD Player is set to PAL. To set
Black level shift to On, follow these steps.
Y Y d d
1
Press SYSTEM MENU.
2
Press 9 to select
3
Press 9 to select Black level shift, then press :.
Press 8 or 9 to select On or Off, then press OK.
4
Press SYSTEM MENU to remove the menu.
will be selected.
, then press :.
will be selected.
, then press :.
1,5
2-4
1,4
2-3