NEEWER NW-870 Manual

NEEWER NW-870 Manual

Camera wireless timer remote

Advertisement

Camera Wireless Timer Remote
NW-870
Manual

Advertisement

Table of Contents
loading

Summary of Contents for NEEWER NW-870

  • Page 1 Camera Wireless Timer Remote NW-870 Manual...
  • Page 2 Overview Thanks so much purchase NEEWER product,NW-870 is high performance wireless timer remote control. It is available option of wired or wireless in single, low speed/high speed continuous, bulb, delay shooting and timer planning shooting mode.Please read carful and understand the way of use camera, before use YouPro wireless timer remote control, in order to know the better way of use our product.
  • Page 3 Function Introduction Adopt free global FSK2.4GHz signal, more stable, the operate distance can reach more than 100m YP-870 TX also work as wired remote control, also support single, low speed/high speed continuous, bulb, delay shooting and timer planning shooting mode. YP-870 TX also support plug the camera connect cable to work as wired remote when power off.
  • Page 4 Instruction of product component Transmitter 1 2 9 3 16 10 4 BULB 1- 59" 11 5 12 6 13 7 14 8 15 17 1. Indictor light 2. LCD display screen 3. BULB shooting button 4. Single shooting /low speed shooting/high speed shooting button 5.
  • Page 5 Icon name of TX LCD display screen 1. Repeat plan shooting times icon 2. Repeat timer plan shooting interval time icon 1 2 3. Timer shooting picture number 3 4 4. Timer shooting interval time icon 5 5. Timer plan shooting exposure time icon 6...
  • Page 6 Fix the(NW-870RX) Support install the receiver in the hot-shoe, bracket and tripod and so on. 1 2 3 1. Put the receiver screw on 2. Fixed the receiver in 3. Fixed the receiver in the camera hot shoe(Picture1) camera plate(Picture2) tripod(Picture3) Set the communication channels Set transmitter (TX) channels...
  • Page 7 *Ensure the cable and camera is connecting. 2. Install the camera to tripod or the other bracket and open the camera protector ,insert the cable to camera. 3. Turn on the receiver and camera power. *The transmitter (TX) is used as wired camera remote, connect the cable to camera.
  • Page 8 [BULB] shooting mode 1. Ensure the camera in [BULB] mode 2. Press transmitter in [BULB] mode, the screen will display [BULB] (Same as picture) BULB 3. Half press the shooting button, blue lighting will be on and the camera is in zooming. 4.
  • Page 9 Timer plan shooting mode The transmitter press the button[ ], the LCD screen will display icon[ ]and will into timer remote mode, see(left picture) BULB a. Delay shooting setting mode: A: Timer remote parameter setting a. Delay shooting setting mode: Turn left button[ ]or turn right button[ ], choose the delay shooting icon of...
  • Page 10 c. Interval time shooting setting mode 1.Turn left button[ ]or turn right button[ ],choose the icon of [INTVL]. 2. Press the setting button[S/L]into the delay time of “seconds” setting, through press button[ ]or right button[ ]into the “Minute” and “Hour” setting. Press Press INTVL...
  • Page 11 f. Repeat plan times setting 1. Turn left button[ ]or right button[ ]choose the icon of N2 [N2]from the LCD screen. 2. Press the setting button[S/L]into the repeat time setting, see (Left picture) Repeat plan times setting 3. Press the number button [+] or [-], set the number increase or N2...
  • Page 12 The dimension of transmitter 135.5 mm X44 mm X17.8 mm The dimension of receiver 63 mm X38 mm X27.5 mm Above is the manual of NW-870,If you need any help, please contact our dealer or browse website:www.neewer. com Shen Zhen Neewer Technology Co.,Ltd Add:Room 3603 Shen Fang Plaza...

Table of Contents

Save PDF