Rear Panel - Philips DVDQ35 Owner's Manual

18 Rear Panel

AUDIO OUT jacks
Connect the supplied audio cables here and to the AUDIO IN jacks on your TV
or Stereo. Details are on pages 10-13.
There are two sets of AUDIO OUT jacks in case you want to connect the
DVD Player to additional equipment. For example, you can use one set of
AUDIO OUT jacks for the connection to the TV, and use the second pair of
AUDIO OUT jacks to connect to a Stereo. Make sure you connect a Right
and a Left AUDIO OUT jack to each piece of equipment. If you are connect-
ing to a single TV only, you will not use both sets of AUDIO OUT jacks.
VIDEO (VIDEO OUT) jack
Connect the supplied video cable here and to
the TV's Video In jack. Details are on page 10.
Y Pb Pr (VIDEO OUT) jacks
Connect component video cables (not sup-
plied) here and to the Component Video In
jacks of a TV. Details are on page 12.
Y
Pb
Pr
S-VIDEO (VIDEO OUT) jack
Use an S-video cable (not supplied) to
connect this jack to the S-Video In jack
of your TV. Details are on page 11.
OPTICAL jack
Connect a digital audio optical cable (not supplied)
here and to the Digital Audio Optical In jack of a
Stereo. Details are on page 14. Replace the OPTICAL
jack cap when the jack is not in use.
COAXIAL jack
Connect a digital audio coaxial cable (not sup-
plied) here and to the Digital Audio Coaxial In
jack of a Stereo. Details are on page 14.
MAINS jack
Connect the supplied AC
power cord here and to a
standard AC power outlet
after completing all other
connections.
Helpful Hint
• You only need one audio and one
video connection, so you will not
use all the jacks on the DVD
Player.