Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Naturally Filtered Manuals
  4. Water Filtration Systems
  5. MG-10
  6. User manual

Naturally Filtered MG-10 User Manual

Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Congratulations
Congratulations on your purchase of the Natural Home MG-10 home
filtration system. The MG-10 is designed to offer the best point-of-entry filtra-
tion performance for homes and small businesses, effectively reducing a broad
spectrum of contaminants.
Please review this guide carefully and give a copy to your licensed plumber
before they arrive to install your system. You should keep this guide for refer-
ence as it will assist you with testing, programming, or troubleshooting your unit
in the future if necessary.
Protects your family by reducing chlorine, chloramines, volatile
organic compounds (VOCs), THMs, and heavy metals
Pure, safe, natural-tasting water
A spa experience in every bath or shower
Specifications
Media
Carbon: 1 Ft
KDF: Mediaguard
Bed: Filter Sand, Mixed Garnet, and Filter Gravel
Flow Rate
10 gallons (38 liters) per minute @ 50 psi inlet
Water Pressure
40 - 100 psi (2.76 bar - 6.895 bar)
Dimensions
11" (27.9cm) diameter x 56" (142.2cm) high
Connections
Inlet/Outlet 1" (25.4mm) male NPT
Drain
/
" (12.7mm) barbed fitting
1
2
Weight
130 lbs. (59 kg)
Operating Temperature 40
o
– 150
o
exposure to freezing temperatures
Construction
Polished stainless steel tank
Controller Valve
FLECK Programmable 5600SXT 110 Volts
System Requirements
Water Source
Engineered for use with potable, municipally treated
water only. Water source must produce a minimum of
5 gpm at 35 psi for proper regeneration.
GAC & Centaur mix
3
with four parallel KDF55 stages
TM
F (4.4
o
– 66
o
C) Warning: Do not allow
1
MG-10 Cutaway
Stainless Steel
KDF Mediaguard
®
– an oxidative mineral
which reduces chlorine
and chloramines and
improves carbon life.
Filter Sand
Filter Gravel
Blue arrows indicate water flow through MG-10.
Valve Controller
5600-SXT
– regulates the MG-10's
regeneration frequency
and duration.
Activated Carbon
– reduces harmful
chemicals such
as chlorine and
chloramines, as well
as trihalomethanes
(THMs), volatile
organics (VOCs), dirt,
rust, lead, sediment,
foreign odors, and
taste.
Garnet
2

Advertisement

loading

Related Manuals for Naturally Filtered MG-10

Summary of Contents for Naturally Filtered MG-10

  • Page 1 MG-10 Cutaway Congratulations on your purchase of the Natural Home MG-10 home Valve Controller filtration system. The MG-10 is designed to offer the best point-of-entry filtra- 5600-SXT tion performance for homes and small businesses, effectively reducing a broad – regulates the MG-10’s spectrum of contaminants.

  • Page 2: Install Checklist

    Warning page 9. Step 3 - Bypass Valve Step 4 - Secure Complete Manifold Drainage — The MG-10 requires a drain or drain field (dependant on local Attach the Bypass Valve Assembly to Add 1” Male NPT Adapter and the Control Valve over the O-ring Cou- secure to manifold by tightening plumbing code) for the unit to dispose of water during its regeneration cycle.
  • Page 3 MG-10 Control Valve Master Programming Programming Mode - General Instructions Plug the control valve into an approved GFI power outlet us- For each step below, press the Up or Down arrow until the display ing the supplied electrical cord; matches the step’s image. Proceed to each next step by pressing the operation in the service position Extra Cycle button once. begins automatically. Your MG-10 is set at the factory 1. Display should read (DF GAL) default settings noted below. DF = Display Format / GAL = Gallons You can either check or change the settings by follow ing these instructions. 2. Display should read (VT FLtr) VT = Valve Type / FLtr = Filter Note: Display will cycle every 5 to 10 seconds between the Time and number of days until the next regen- 3. Display should read (CT tc)

  • Page 4: Installation & Testing

    MG-10 is installed where variations in water and air temperature could result closed (see page 3). in condensation forming on the tank, place the MG-10 on a drain pan during With valves closed, slowly open the water main to Step 2 installation to prevent condensation damage to surface.

  • Page 5: Year Limited Warranty

    First determine whether or not the problem is due to your plumbing supply, the control This warranty covers the filter for residential use only and, in addition, does NOT valve or the filtration system. Test your tap water supply by bypassing the MG-10 as fol- apply to: lows: 1) close all faucets in your home, 2) move the MG-10 Bypass Manifold to bypass 1.