Connecting To Optional Equipment - Philips DVD952 Owner's Manual

Connecting to Optional
Equipment
Connecting to an amplifier equipped with
two channel analog stereo or Dolby
Surround
1
Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the supplied audio cable
(A).
Note:
– You cannot use the MP3 function with the Digital Out
connectors.
Connecting to an amplifier equipped with
two channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a
multi-channel decoder (Dolby Digital™,
MPEG 2 or DTS)
1
Connect the player's digital audio out jack (optical G or
coaxial F) to the corresponding digital audio in on your
amplifier. Use an optional digital (optical G or coaxial F)
audio cable.
2
You will need to activate the player's digital output (see
'Personal Preferences').
Digital Multi-channel sound
The digital multi-channel connection provides the best
sound quality. For this you need a multi-channel Audio/
Video receiver that supports one or more of the audio
formats supported by your DVD player (MPEG 2, Dolby
Digital™ or DTS). Check the receiver manual and the logos
on the front of the receiver.
AMPLIFIER
F
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
MAINS
COAXIAL
Warning:
Due to DTS Licensing agreement, the digital
output will also be in DTS digital out when DTS
audio stream is selected.
P
10
REPARATION
G
A
II
TV OUT
SURROUND CENTER FRONT
L
1
L
R 2
R
SURROUND SUB WF FRONT AUDIO P /C P /C Y S-VIDEO
CVBS r r b b
OPTICAL
OUT VIDEO OUT
MULTICHANNEL AUDIO OUT
Note:
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver has a Digital Multi-
channel decoder.
– To see the selected audio format of the current DVD in the
Status Window, press SYSTEM MENU or Audio button.
Cinemalink (on SCART)
This DVD player is equipped with cinemalink feature (from
Philips) which allows a more complete control of your
home audio/video (AV) equipment.
Cinemalink interconnection plug & playback will enable the
AV system to recognise the users intention and
automatically switch the necessary controls or input source
accordingly. This will reduce the necessity of having multiple
control inputs for all AV equipments (eg. TV and Amplifier).
Analog connection to a multi-channel A/V
receiver with 6 CH connectors (Dolby
Digital & DTS)
This DVD player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1
Connect the audio out jacks for Center speaker and
Subwoofer connection (C) to the corresponding in jacks on
your receiver.
2
Connect the audio Left and Right out jacks for Front
speaker connection (B) to the corresponding in jack
sockets on your receiver.
3
Connect the audio Left and Right out jacks for Surround
speaker connection (D) to the corresponding in jacks on
your receiver.
4
Make the appropriate Sound settings for Analog Output
and Speaker Settings in the Personal Preferences menu.
AMPLIFIER
D C
SURROUND
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
L
R
MAINS
SURROUND
COAXIAL OPTICAL
MULTICHANNEL AUDIO OUT
B
II
TV OUT
CENTER FRONT
L
1
R
2
SUB WF FRONT AUDIO CVBS P /C P /C Y S-VIDEO
r r b b
OUT VIDEO OUT