Sensortronic scales BW-6 Owner's Manual

Bw-1n

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

B W - 1N

Battery Weighing Indicator

OWNER'S MANUAL

9007-B0N-0033-0

2006.06

Table of Contents

Need help?

Do you have a question about the BW-6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sensortronic scales BW-6

Page 1 B W - 1N Battery Weighing Indicator OWNER’S MANUAL 9007-B0N-0033-0 2006.06...
Page 2: Table Of Contents
CONTENTS CAUTIONS INTRODUCTION FEATURES & MAIN FUNCTIONS SPECCIFICATION PART NAME & KEY FUNCTION SYSTEM MODE GENERAL FUNCTION & DESCRIPTION CONVERSION MODE PRINT FORMAT RS-232C COMMUNICATION USING & BATTERY HOW TO INSTALL THE BW TEST MODE ERROR MESSAGE DESCRIPTION & MANAGMENT...
Page 3: Cautions
CAUTIONS Do not use the inflammable Do not press the key strongly at cleaning Never connect AC adaptor Install the platform on a flat while using the dry battery place Do not use in the place exposed Do not install in the place with directly to the sun and including sudden temperature change much dust...
Page 4: Introduction
We greatly appreciate for you to purchase BW of CAS. BW-1N Model This goods has the excellent performance and splendid properties through Item strict test under severe quality management. BW-6 BW-15 BW-30 BW-60 BW-150 It is recommended to read this manual in full before using BW for good...
Page 5: Part Name & Key Function
LAMP SYMBOL DESCRIPTION PART NAME & KEY FUNCTION STABLE ON when current weight is stable 1. Part Name ZERO ON when current weight is 0 ON at displaying the pure weight POWER Connector HOLD ON at weighing the moving object RS-232 Connector TARE ON when tare is activated.
Page 6: System Mode
3. KEY Part SYSTEM MODE SYMBOL DESCRIPTION Simple weight mode ON / OFF Use to power ON / OFF (Press for approx 3 seconds) Display the weight after weighing. High / Low comparing mode ZERO / Use in case of rezero (within 2% of max. capacity), Determine that the weight is high, normal or low value and perform the display.
Page 7 Ex) For 20.5 input 5. COUNT MODE CONVERSION In case of no setting the unit / sample weight Display DESCRIPTION DESCRIPTION Display KEY PLATFORM Press once STEP 1 (Set to STEP 1 Press three times Press five times. STEP 2 Press once Press once (Move to the left STEP 2...
Page 8 6. COUNT COMPARING MODE CONVERSION In case of setting the unit weight by sample (Samples : 10 - 200 , 10 unit) In case of no setting the High / Low quantity Display KEY PLATFORM DESCRIPTION DESCRIPTION Display PLATFORM STEP 1 Press three times STEP 1 Press four times...
Page 9: General Function & Description
3. HOLD FUNCTIOIN (Use at weighing the moving object) GENERAL FUNCTION & DESCRIPTION Auto hold function (Hold function operated whenever weighing) 1. REZERO FUNCTIOIN (Use at change zero point) Rezero band range : Within 2% of Maximum capacity Empty the platform Press 'Hold' key Hold lamp is ON 'Auto hold' message is...
Page 10: Conversion Mode
F – 3 : Select print format type CONVERSION MODE Set point Meaning 1. ENTER method F – 3 Select print format 1 If you press the * key for three seconds to normal operation state, after display "SET" F – 3 Select print format 2 Message for one second and then enter.
Page 11: Print Format
Print Format RS-232C communication 1. Port connection method Weight Mode Connect the computer serial port with RS-232C port in the back panel < Format 1 > < Format 2 > of indicator as follows to communicate with computer No. 001 : 1.00 kg 001 : Net 1.00 kg Tare 0.00 kg (2)TXD...
Page 12 3. Transmit data format BATTERY Total 22 Bytes 1. Battery replacement or charging time Data(8 bytes) Lamp Power is off in a specific time after lamp is on in the right top of display part. Status US (Unstable) GS(Gross W.) The battery lamp is on when the amount of battery is about 6.9 V and power is off Byte ST(Stable)
Page 13: How To Install The Bw
3. Rechargeable battery using and recharging HOW TO INSTALL THE BW Open the top cover and make as follows in the left bottom of cover at using the rechargeable battery. Open the jack protecting cap in the back panel and connect the adapter as follows.
Page 14: Test Mode
TEST 3 TEST MODE FUNCTION : Key test How to enter test mode DESCRIPTION LCD SCREEN 1. Open the top cover of indicator and power on with pressing CAL switch in [ ENTER Key] Display TEST 3 state the left top. At that time, LCD screen shows ZEro = tESt, tArE = CAL Press once : message and pressing Zero key moves to tESt 1.
Page 15 TEST 5 Current date & time setting method FUNCTION : Temperature test In the normal mode, DESCRIPTION LCD SCREEN Press the TARE Key long and can see the message After this step, You can input the current date and time as follows [ ENTER Key] Display TEST 5 state for temperature...
Page 16: Error Message Description & Managment
Err 13 (Zero Range with power on) ERROR MESSAGE DESCRIPTION & MANAGEMENT Cause The initial zero range exceeds above 10% of maximum capacity. Errors in Weighing Mode Management Check the load cell state. Err 01 Cause The Indicator can't be initialized due to platform shaking. Over Management Cause...
Page 17 MEMO MEMO...
Page 18 MEMO...

This manual is also suitable for:

Bw-30 Bw-60 Bw-15 Bw-150