URBANEARS CONNECTED SPEAKERS Baggen User Manual > About your speaker > Using your speaker > Playing via Wi-Fi > Playing via Bluetooth > Playing via AUX input > Managing your presets > Solo Mode and Multi Mode > Maintenance & support >...
Chromecast built-in, AirPlay, and thousands of internet radio stations. Multi-Room Play Two or more Urbanears Connected Speakers can be grouped together as a multi-room system. Play something different in each space, or synchronize your speakers in Multi Mode to play the same music in every room of your home.
Page 3
Enter setup mode manually. The Urbanears Connected app The Urbanears Connected app helps you get set up for the first time, and gives you access to your speaker’s fullest capabilities. The app is compatible with iOS and Android smartphones, and can be downloaded for free on Google Play or in the App Store.
Tap the Cast button inside the music app, then select your speaker from the menu. Note: The Google Terms of Service and Privacy Policy must be accepted in the Urbanears Connected app before first time use. Playing via AirPlay AirPlay lets you stream any sound source to your speaker from your iOS device orApple computer.
The devices are successfully paired and connected when the indicator on your speaker lights up continuously and you hear a confirmation sound. Note: Bluetooth pairing can also be initiated via the Urbanears Connected app. Playing via Bluetooth Once your speaker has been paired with a Bluetooth device, the pairing is saved and you can reconnect at any time.
Page 6
PLAYING VIA AUX INPUT Use the AUX input to connect audio devices directly to your speaker. Audio devices with a compatible 3.5 mm AUX output plug can be connected, like MP3 players, smartphones, and tablets. Insert one end of the AUX cable into the AUX input on the bottom of your speaker.
Page 7
Adding internet radio presets Open the Urbanears Connected app. Select your speaker on the home screen. Swipe to “Cloud” in the source menu, then tap on “Internet Radio”.
Page 8
Setting up your speaker for multi-room playback using Chromecast built-in is done inside the Google Home app. With this app you can group your Urbanears Connected Speakers together, and with other Chromecast built-in devices. Note: When your speaker is playing via Chromecast built-in its SOLO indicator is lit.
MAINTENANCE & SUPPORT > Maintenance > Cleaning your speaker > About your Wi-Fi connection > Charging or powering a USB device > Enter setup mode manually > Factory reset your speaker Maintenance Refer all servicing of your speaker to qualified service personnel.
Page 10
Your speaker cannot be discovered in the Urbanears Connected app If your speaker is not visible in the Urbanears Connected app, make sure that: • Your speaker has finished starting up. During start-up, both SOLO and MULTI indicators are lit.