LG WD-8050FH Owner's Manual page 6

6
Connecting
the inlet hose
The
water supply
pressure
must
be between 30 kPa and 1000 kPa
?
This
washing
machine has been
designed
so
that hot and cold inlet
hones
can
be connected.
?
To
prevent leaks, two
rubber
packings
are
supplied
with the
water
inlet hose inside the valve
connector.
?
If there is
only
one
tap,
connect
the hose
to
the cold
water
inlet.
?
Make
sure
the correct water valve is connected to the
corresponding
tap.(IE
:
Hot inlet valve to hot water
tap.)
?
The connections
are
tightly
fixed.
?
When
using only
cold
water,
only
cold inlet hose
can
be used.
1.
Fix the red Marked inlet hose at the hot water
tap
and
at
the inlet valve with the red filter
on
the
rear
side of
the machine.
2. Fix the other inlet hose
at
the cold
water
tap
and
at
the
inlet with the white filter
on
the
rear
side of the machine.
Connector
Rubber seal
Hot water
tap
Cold Hot
Cold
water
tap