Summary of Contents for Reach Bee9
- Page 1 Bee9 Multiple Scene Intelligent Recorder ’ ANUAL VERSION V1.1 (US) DATE OF ISSUE 01.03.2017 P a g e Bee9 User's Manual Reach/BTX...
-
Page 2: Table Of Contents
800.666.0996 www.reachAVIP.us Reach, REACH, , Reach Software are the trademarks of SZ REACH TECH CO., LTD. Windows, Windows 7, Windows 8, and Windows 10 are trademarks of Microsoft Corporation. Other trademarks are the properties of their respective owners. Note: This user manual is compiled to ensure easy installation and configuration of the product. Please read this manual carefully before using the product, so that you can make best use of all its functions. -
Page 3: System Integration Considerations
Take your time; and remember: measure twice, cut once. It will save you a lot of frustration. We are here to help you, if this is your first Bee9 integration or your thirty-third. Don’t hesitate to call, email, or text us. -
Page 4: Bee9 Product Description
Bee9 will run unattended. The Director application also allows users to take creative control of the functions of the Bee9 by changing its operation to manual mode, where a user can preview and take shots as required to produce program content. -
Page 5: Bee9 Connectivity (Front Panel)
Description This display will provide current status of the system, its network connections, Screen and provide confirmation of recording mode. When the Bee9 is powered on, the display will indicate the startup procedure. Control Connect a USB-A to USB-A cable (provided) to this port and the remote control Panel panel. -
Page 6: Rear Panel
*Turn off power to the Bee9, press and hold RESET switch with a straightened paper clip, power-up the unit while continuing to hold the reset switch for 5 seconds then release. After Bee9 is restarted, enter the IP address indicated on the LCD display in a browser. Log into the backup system page and perform a system reload. Details of the reload procedure are included in the appendix. -
Page 7: Remote Controller
The complete. button LED is off in default. When the Bee9 is in auto mode, and this button is pressed, the computer Used to connect storage device. Supported presentation content will be displayed... -
Page 8: A Note On Usb File Transfer
9. Configuring t A static IP address is configured from the factory in the Bee9 so that it can be set up for deployment. After the device is connected to power and booted up, the IP address of the device from the information displayed on the LCD display. -
Page 9: File Management Page
• ( the current page Management Config shown above There are four buttons on the top of the page to adjust the operating parameters of the Bee9. Section 10 FIle Management Page 10. File Management Page P a g e... - Page 10 •When you click refresh, and recordings not listed since you opened this page will populate the list. 3. Upload Button •When clicked, a selected file is uploaded from the Bee9 to Media Center or FTP location 4. Package Download •When you click this button, all files associated with the file name are downloaded. Note: This button is provided for users who continue to use older browsers.
-
Page 11: Video Settings
•Provides video input legend. 2. Resolution display •The Bee9 auto configures for each input. When a source is connected, Bee9 will display that source resolution. 3. Analog Video Phase adjustment panel •This panel allows you to adjust analog VGA signals video phase so that there will be no shift when sources are changed. - Page 12 On the Output Settings tab: 1. Video output resolution select •Select the resolution you wish to view the Bee9 HDMI output on a local monitor. 2. Save Button •Click save to register output resolution. NOTE: when you click save, the Bee9 will automatically restart to register the output resolution change.
- Page 13 1. RTSP Stream Info •This information provides a specific address for the Bee9 RTSP streams. YOu can copy this stream info and paste it into any live streaming media player (Flash player, VLC media player) to view the RTSP stream output.
-
Page 14: System Config
1. Analysis Camera IP Address •THis is an internally preset IP address matched ONLY with the network camera that shipped with the Bee9. Please do not change this address! This interface is provided in the unlikely event that the analysis camera has to be replaced. - Page 15 1. Administrator or Guest Password Update Functionality •This tab simply allows users to change the password for the Administrator or Guest, when logged in to the Bee9 as an administrator. When users change the admin password, remember to change it on Media Center, or FTP server, so you can continue to upload content for distribution.
- Page 16 On the basis of the observed accuracy of the Bee9, the default setting is recommended.
- Page 17 1. Central Control IP Address •Enter the IP address of the system external control equipment here. Save Button •Click the save button to invoke the change and register Telnet commands from this IP address. P a g e | 17 Bee9 User's Manual Reach/BTX...
- Page 18 •Click this pull-down to choose between Media Center or FTP Server for upload target destination.. Save Button •Click the save button to invoke the platform change. On the System Upgrade tab: P a g e | 18 Bee9 User's Manual Reach/BTX...
- Page 19 •Click browse to locate the upgrade file. Upgrade Button •Click this button to upload the file to the Bee9, which will modify the OS and other code to conform to the latest revision level, The Bee9 will automatically restart after the update.
-
Page 20: The System Info Buton
System Info Page The system info page is where we started when we logged in to the Bee9 as an administrator. The information on this page is valuable to the IT professional, and integrators, as it completely describes the Bee9 physically, and where it is on the LAN.