ARTTEL AT-530 Quick Start Manual

Download this manual

http://arttel.ru

Installation and access.......................................................................................................................2

Configure AT-530 to make VoIP calls ...............................................................................................3

WAN Config .....................................................................................................................................3

SIP Config.........................................................................................................................................4

AT-530 Quick Start Guide

Table of Contents

Need help?

Do you have a question about the AT-530 and is the answer not in the manual?

Page 1 AT-530 Quick Start Guide Installation and access........................2 Configure AT-530 to make VoIP calls ....................3 WAN Config .............................3 SIP Config............................4...
Page 2: Installation And Access
Modify your computer’s IP address to the same network as AT-530 Key in AT-530’s IP address in the web browser and press enter, then you can access AT-530’s web manage interface. Remember the account is admin/admin for administrator and guest/guest for...
Page 3: Wan Config
Network WAN Config Enter to set the WAN setting: AT-530 supports three different IP types: Static IP, Dynamic obtain IP (DHCP) and PPPoE. You can use either of these IP types to connect the internet. Use Static IP: ----Select “Static”;...
Page 4: Sip Config
Then the AT-530 will connect to the internet through PPPoE , and automatically obtain the IP address , Netmask, Gateway, Primary DNS and Alter DNS information. SIP Config Æ VoIP SIP Config Enter setting page and set the sip information ----Register Server Addr : sip server address;...