Philips DVD633 User Manual page 13

– TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and
AUTO mode depending on your TV.
The conversions supported are as follows:
Disc
Type Format
NTSC
DVD
PAL
VCD
NTSC
PAL
1
In the Personal Preferences Menu, select TV
System.
2
Press 3 or 4 to select PAL, NTSC or AUTO.
Notes:
– AUTO can only be selected when using a TV
that has both the NTSC and PAL systems.
– This is applicable for CVBS output on cinch
and SCART only.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format
is most suitable for the best picture quality.
– If you have a PAL only TV, ensure that your
PAL/NTSC setting is PAL.
Sound
– Digital output
¶ Digital output selection enables you to specify
the type of digital output which is suitable to
your receiver.
¶ Select ALL (default setting), if you had connected
your DIGITAL AUDIO OUT to a multichanel
decoder receiver.
¶ Select PCM only if your receiver is not capable
of decoding multichannel audio.
¶ Select OFF to deactivate the DIGITAL AUDIO
OUT.
Output format
Selected mode
NTSC PAL AUTO
NTSC PAL NTSC
Not
PAL PAL
Supported
NTSC PAL
NTSC
NTSC PAL PAL
– Analogue output
Select Stereo, Dolby Surround-compatible or 3D
Sound output to match your system's playback
capability.
– Night Mode
When set to ON, the dynamics of your sound
output are optimised. High volume outputs are
softened, enabling you to watch your favourite
action movie without disturbing others.
– Karaoke vocal
Put this setting to ON only when a multi-channel
karaoke DVD is being played. The karaoke
channels on the disc will then be mixed into a
normal stereo sound.
Preparation
13