Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Furious FPV INNOVA OSD-VTX
Summary of Contents for Furious FPV INNOVA OSD-VTX
- Page 1 INNOVA OSD-VTX Manual User.
- Page 2 As Furious FPV blurs the line of capability, functionality and ultimate user friendliness, our goals of light weight, compact design and the ultimate in user ease comes into stark focus via our all new VTx design. Get ready to change the way you FPV with the all new Furious FPV INNOVA VTX-OSD board What's being offered? How about an integrated OSD, adjustable 25mW - 200mW VTx, PID tuning options, battery monitoring, flight timer, and channel configuration via the OSD.
- Page 3 HOW DO TO USE INNOVA OSD-VTX Installations to flight control: Solder Power Selection Pad to use power 5vol from Piko BLX or your FC use Betaflight. If you use straight power from battery to Innova, you MUST un-solder Power Selection pad.
- Page 4 Connect Camera and LED strip to Innova: Guide use Transmitter adjusting quadcopter’s parameter in OSD menu. To access the in-built OSD menu in MW-OSD, disarm your quadcopter first. THROTTLE MIDDLE YAW RIGHT PITCH FULL To navigate through menu in the OSD: PITCH/ROLL sticks are used to navigate YAW stick is used to adjust / change values OSD Menu Index:...
- Page 5 Guide use Betaflight configure Innova: That means that if you need to change the settings on your OSD or update the firmware you don’t need to dismantle your quad to access the OSD, you simply need to enable serial passthrough within cleanflight/betaflight.
- Page 6 NOTE: Betaflight labels serial port starting from 0 not 1 yet most flight controller label UART’s starting with 1. So when selecting your serial port you will typically take whatever the UART number is and subtract 1 to get the serial port it’s asking for. EX: you have your Innova VTX-OSD connected UART1 that you want to connect to you will need to type: serialpassthrough 0 11500 Step 4: Power up the device you are trying to connect to if it’s not already...
Need help?
Do you have a question about the INNOVA OSD-VTX and is the answer not in the manual?
Questions and answers