Advertisement
2,At the status of the clock,the alarm sound will be on 3 times,and later it will be on about
3 minutes each 5 minutes
3,At the status of the music playback,the alarm sound will only on 1 time.
4,At the status of the alarm sound on,press any key to stop the alarm clock
Setting Method:Keep pressing the button 1,then press the button 2 or the button 4 to
select the alarm clock time,press the button 3 for the next step,press the button 2 or the
button 4 again to set the time of the alarm clock.Press the button 1 to select the hour or
the minute for the time setting.
Timing Radio Setting:
In order to set the timing radio,please set the timing radio setting on at first,also can adjust
the radio time,the radio frequency.
Contrast Rate Adjusting:
The rate is from 0-20,then press the button 3 to confirm and exit this setting
Firmware Version:
Can't be adjusted
Exit Setting:
Exis the setting of the function
***Note:Can press the button 1 to exit any setting and go back to the clock interface
BLUETOOTH
1,Push the function switch(9) to the Bluetooth position, when the bluetooth
devices are on for matching, the Bluetooth indicator light will twinkle fastly.
2,Open the bluetooth searching device of the mobile phone, when finding this
device, and input the password "0000",the bluetooth indicator light will be on after
matching successfully.
3,Now can play the music of the moble phone through this unit
4,Handfree function: can take the phone through this device when press the
play button of this unit
5,When playing the music, press "PREVIOUS/VOLUME-" button, then go
back to the previous song of the mobile phont bluetooth palyer, press
VOLUME+
button,then skip to the next song.
6,At the status of this music playing,keep pressing
VOLUME-
button,the can reduce the vulome accordingly, and keep pressing
NEXT/VOLUME+
7,When playing the music through the bluetooth,press the
button,just pause the playing, press again and just continue to play;
NOTE: Within 5 minutes after the bluetooth function of this unit is on, if
not find any matching devices, then the unit is power off automatically, if need
to match again, keeping pressing the ?PLAY/PAUSE? button and the unit will
be standby, at the same time, the bluetooth indicator light will twinkle slowly.
button,then can increase the volume accordingly.
NEXT/
PREVIOUS/
PLAY/PAUSE
Advertisement
