Summary of Contents for Gates EM253
- Page 1 Setup, Use and Care Guide EM253 Color External Monitor Gates Underwater Products • 5111 Santa Fe Street, Suite H • San Diego, CA • 92109 858.272.2501 • 800.875.1052 • Fax 858.272.1208 • Reliable@GatesHousings.com • www.GatesHousings.com 01/06/04...
- Page 2 Hollywood productions to U.S. Navy programs. You see, at Gates, your selection of our product is only the beginning. We are here to service you, the customer, for as long as you own our product. Our Customer Service is second to none.
-
Page 3: Setup And Use
Please read through this entire guide to become familiar with the Gates External Color Monitor. The following setup guidelines will explain how to prepare and use the EM253 and housing so you’ll get the best results from your video endeavors. Before You Begin Every Gates housing is pressure tested before leaving the factory to assure a watertight seal. - Page 4 Mounting to a Housing Attachment of the EM253 to any housing is straightforward and generally the same (with exception of the Gates XL1/XL1s housing). See photos below for typical installations. ü TRV / VX / PD / HD housings utilize a...
- Page 5 Also, the connectors are ‘wet mating’ connectors, so there is no need to plug/unplug them only when dry. Caution : If you are not using the EM253 monitor for any reason, do not plug the video wires into your camera. ü...
- Page 6 When closing the EM253 housing, perform a routine inspection of the o-ring for any foreign material or damage. Replace if necessary and clean the o-ring groove before installing the new o-ring. Refer to the Gates “Housing Care and Maintenance Guide” for more information.
-
Page 7: Monitor Adjustment
EVF. Color Brightness Contrast Customer Support If you have any questions or require further assistance with your EM253 External Color Monitor, contact your dealer or Gates directly and we’ll be happy to assist. Email: Customersrvc@GatesHousings.com Phone:...