Restart - Pyle PPBCM9 User Manual

"Up"/"Down" button to choose operation, delete， format，playback card.
1. 1 Delete: Press the "Confirm" button to enter file delete mode, press "Up"
/ "Down" button to choose the delete settings.
1. 2 SD card format: Press the "Confirm" button to enter format mode, press
"Up" / "Down" button to choose.
1. 3 SD card switch: Press the "Confirm" button to enter SD card switch mode,
press "Up" / "Down" button to choose the internal card or external card. If you
choose internal card, the camera will playback the internal card files, if you choose
external card, the camera will playback the external card file.
2. Connect the camera to PC via the USB cable, Press and hold "Power on"
button, boot the camera, it enters into removable disk, check and delete the files
in the SD card. When you switch to be internal card (refer to 1.3), you will see the
internal card files on PC; When you switch to be external card (refer to 1.3), you
will see the external card files on PC.

9. Restart

Because of improper operation or other special reasons caused the
equipment to crash or stop responding, can use the available nibs, toothpick or
similar items press the reset key (be careful not to use too much force) are restart.
After the restart key is pressed, the device will automatically shut down, then
restart, it can save what you set before the shutting down. The restart hole is
under the bottom of the devices, open the HDMI, you could see a small hole. It is
a restart hole.