Fixed one-piece bench seat
The different items of equipment and adjustments
described hereafter vary according to the version
and the configuration of your vehicle.
The bench seat includes a one-piece backrest
which may be fixed or folding (table position).
For more information on the Seat belts,
refer to the corresponding section.
Angled head restraints
F To raise a head restraint, pull it up until it
engages in its notches.
F To remove the head restraint, press the
lug A and pull the head restraint upward.
F To put it back in place, engage the head
restraint rods in the apertures keeping
them in line with the seat backrest.
F To lower it, press on the lug A and on the
head restraint at the same time.
Ease of use and comfort
Folding the seat backrest to
the table position
F Place the head restraints in the low position.
F From the front, raise the handle to release
the seat backrest.
F From the rear, lower the handle to release
the seat backrest.
F Fold the backrest onto the seat cushion.
F To return the backrest to its normal
position, raise the handle and pull the
backrest up.
3
95