Table of Contents
Advertisement
EN
8
Installation
Installing the WebCam software
The software supplied only works on PCs with the operating
®
systems Microsoft
Windows
Notes!
– Unplug all your USB devices (except USB keyboard and
USB mouse) before you start.
– Do not plug in your WebCam yet. Run the Installation CD-ROM
first.
®
– Have your Windows
– The SPC650NC WebCam is 'XP Plug & Play'. This means if you are
running Windows XP and you have installed Service Pack 2 and
the latest Microsoft Windows XP updates you don't need to install
the SPC650NC WebCam driver. Simply plug in the WebCam and
you can start using your SPC650NC WebCam.
1 Place the installation CD-ROM in your PC's CD-ROM / DVD
drive.
> After a couple of seconds the 'Language selection' screen
appears automatically.
Note!
If the 'Language selection' screen does not appear automatically,
®
open the Microsoft
Windows
'Set-up.exe' icon in the CD-ROM directory.
2 Select your language and click on the 'OK' button.
> The following screen appears.
3 Select at least 'SPC650NC WebCam Driver' and 'Philips
VLounge'
Click the 'Next' button.
®
98SE, ME, 2000 and XP.
CD-ROM at hand.
®
Explorer and double click on the
Advertisement
Table of Contents
