LG 32LK450 Service Manual page 63

LG Electronics Inc.
Establish :
Reform :
1. Application *
1.1 This spec sheet is applied all of the LCD TV with LC01U chassis.
- LC01U : 32/37LK450-CC,42/47/55LK530-CC,32/37LV3500-CB,32LK330-CB,42/47/55LW4500-CA,42/47/55LV4500-
CA,42LV3650-CA
Main manufacturing type
SET ( O )
SKD ( O )
CKD ( O )
2. Designation
2.1 The adjustment is according to the order which is designated and which must be followed, according to the plan
which can be changed only on agreeing.
2.2. Power adjustment : Free Voltage.
2.3. Magnetic Field Condition: Nil.
2.4. Input signal Unit: Product Specification Standard.
2.5. Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25℃±5°C
Relative humidity : 65 ±10%
Input voltage : 220V, 60Hz
In case of keeping module is in the circumstance of 0°C, it should be placed in the circumstance of
above 15°C for 2 hours.
In case of keeping module is in the circumstance of below -20°C, it should be placed in the circum
stance of above 15°C for 3 hours.
2.6. Adjustment equipments : Color Analyzer (CA-210 or CA-110), Pattern Generator (MSPG-925L or Equivalent),
2.7 Push the 'IN STOP' key – For memory initialization.
Case1 : Software version up
1. After downloading S/W by USB , TV set will reboot automatically
2. Push 'IN STOP' key
3. Push 'POWER ON' or 'P-ONLY' key
4. Function inspection
5. After function inspection, Push 'IN STOP' key.
Case2 : Function check at the assembly line
1. When TV set is entering on the assembly line, Push 'IN STOP' key at first.
2. Push 'POWER ON' or 'P-ONLY' key for turning it on.
If you push 'POWER ON' or 'P-ONLY' key, TV set will recover preset CH information by itself.
3. After function inspection, Push 'IN STOP' key.
LC01U Adjust specification
DDC Adjustment Jig equipment, Factory SVC remocon.
Display Division
LG(56)C2-0789-00
LG electronics