Table of Contents
Advertisement
EN
10
Installation
Putting the camera into operation mode
1 Bend the camera neck into the desired position.
2 Switch on the camera (
(light switch) one click downwards ( ).
> The camera is now in operation mode but will only function
when the applications are started up.
See chapter 'Using the applications'.
1x click
• If desired you can switch on the front light / keyboard light
(
downwards (
To switch off the front light / keyboard light (
slide the light switch (lens cover) one click upward.
2x click
Notes!
– When using the camera be sure to slide the lens cover
(light switch) at least one click downwards ( ).
– When the camera is not in use, be sure to slide the lens cover
(light switch) all the way up (two clicks) to protect the lens.
) by sliding the light switch (lens cover) one more click
).
) by sliding the lens cover
),
Advertisement
Table of Contents
