Pairing A Bluetooth Device Using Nfc; To Use Nfc To Pair With Pathfinder - ION Pathfinder Quick Start Manual

10. Microphone Input with Volume Control (1/4"): This mono input accepts a 1/4" (6.35 mm)
input such as a microphone, guitar, or other musical instrument.
11. Auxiliary Input: This stereo 1/8" (3.5 mm) input can be used to connect a CD player, MP3
player, or other audio source.
12. USB Charging Ports: Connect your device's charge cable here to charge it. USB charging
only functions when the unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.
13. Power Cable Input (Back Panel): Insert the included power cable here to charge the unit.
Note that the Pathfinder can be used with the power cable while it simultaneously charges
the battery.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Pathfinder. If you have previously connected to another Bluetooth device,
Pathfinder will reconnect. To disconnect pairing if the Bluetooth icon is lit solid, press and
release the Bluetooth button.
3. Navigate to your Bluetooth device's setup screen, find "Pathfinder" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth
button.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.

Pairing a Bluetooth Device Using NFC

NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.

To use NFC to pair with Pathfinder:

1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one-time step).
3. Power on Pathfinder.
4. Touch and briefly hold your device to the NFC logo.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
6. To unpair, gently bump your device against the NFC logo located on Pathfinder's top
panel.
6