1. Manuals
  2. Brands
  3. Kino Flo Manuals
  4. Home Lighting
  5. SYS-S30-230U
  6. Operation manual

Kino Flo SYS-S30-230U Operation Manual

Select led 30/20
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operation Manual
Select LED 30/20
Part No. 3100088 Rev B
10-14-2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SYS-S30-230U and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kino Flo SYS-S30-230U

  • Page 1 Operation Manual Select LED 30/20 Part No. 3100088 Rev B 10-14-2016...
  • Page 2 Select LED Systems Select LED 30 DMX System, Univ 120U SYS-S30-120U Select LED 30 DMX System, Univ 230U SYS-S30-230U Select LED 20 DMX System, Univ 120U SYS-S20-120U Select LED 20 DMX System, Univ 230U SYS-S20-230U Each Select LED System consists of:...
  • Page 3 Select LED 30 DMX Kits KIT-S30B-120U Select LED 30 DMX Kit, Univ 120U w/ Soft Case KIT-S30B-230U Select LED 30 DMX Kit, Univ 230U w/ Soft Case Kit Contents: Dimensions: Select LED 30 1 Select LED 30 Fixture 42.5 x 7.5 x 16.5” DMX Kit w/ Soft Case 1 Select LED 150 DMX Controller (108 x 19 x 42cm)
  • Page 4 Select LED 20 DMX Kits KIT-S20B-120U Select LED 20 DMX Kit, Univ 120U w/ Soft Case KIT-S20B-230U Select LED 20 DMX Kit, Univ 230U w/ Soft Case Kit Contents: Dimensions: Select LED 20 1 Select LED 20 Fixture 31 x 7.5 x 18” DMX Kit w/ Soft Case 1 Select LED 150 DMX Controller (79 x 19 x 46cm)

  • Page 5: Mounting The Fixture

    Mounting the Fixture Align the center pin of the mounting plate to the center hole on the mating plate. Rotate plate clockwise until the four shoulder rivets drop into the receptacle. A locking pin will snap into place when the plate is properly seated. The yellow wire loop provides an attachment point for a safety chain.

  • Page 6: Mounting The Controller

    Mounting the Controller Insert the 4 rubber feet of the controller into the 4 holes in the fixture. Secure the Controller to the fixture with the Velcro fastening strap. Connect the harness to the Controller. Align the key ways on the harness connector with the circular receptacle on the ballast.
  • Page 7 Power AC Input The Select LED 150 DMX Controller is powered AC and includes an IEC connection. It also includes a 12ft power cord with a locking IEC connector. The Select LED 150 DMX Controller has a built-in power supply with universal input from 100-240VAC.
  • Page 8 Control Panel - White Mode A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source.
  • Page 9 Control Panel - Color Mode A) On /Off: On = Green light displayed. Off = Red light displayed. The display and all menu settings can be operated while the power button is in the Off position, as long as power is applied to the controller. The On /Off button only controls the light source.

  • Page 10: Menu Overview

    Menu Overview...
  • Page 11 Dimming Press the Mode button to select Dim. Rotating the control knob will dim the light of the fixture. Default setting is Fine. Press the rotating knob once to shift to Coarse. When the power is turned off or removed, the display will remember its last setting.
  • Page 12 Kelvin Selection/Presets Press the Mode button until Kelvin is highlighted. Default Presets: 1 = 2700K 2 = 3200K 3 = 5000K 4 = 6500K Default setting is Fine. Press the control knob to shift to Coarse. Rotating the control knob will change the Kelvin.
  • Page 13 In White mode, Kelvin custom settings between 2700K to 6500K and displayed G/M can be assigned to any preset button by holding down the desired button for 3 seconds. In Color mode, Kelvin custom settings between 2500K to 9900K and displayed G/M, Gel or Hue angle and Saturation can be assigned to any preset button by holding down the desired button for 3 seconds.
  • Page 14 Green/Magenta The Select LED features a G/M (Green/Magenta) control to match the spectral sensitive curves of most popular cameras and other light sources. Green/Magenta Chart 100G +1 Green +½ Green +¼ Green +¼ Magenta +½ Magenta 100M +1 Magenta Press the Mode button until G/M is highlighted. Rotating the control knob to the right will adjust towards Green.
  • Page 15 Gel, Hue Angle & Saturation In Color mode (in addition to G/M control), Gel, Hue angle and Saturation adjustments are available. Kino Flo preset Gels and industry standard preset gels are included. Press Menu, select General and press control knob to change Mode to Color.

  • Page 16: General Settings

    General Settings...
  • Page 17 Mode: White or Color Default is White mode. Custom Kelvin settings can be set between 2700K to 6500K. To change to Color mode, press the control knob. Custom Kelvin settings can be set between 2500K to 9900K. Timeout When choosing settings, if there is no activity, the display will default to Dim. The default for White mode is 5 seconds;...
  • Page 18 White mode: In White mode, the Select LED operates on three DMX channels using DMX512 while in the default 8 Bit Dim mode. The first channel operates dimming; 2nd channel operates Kelvin color temperature control from 2700K to 6500K; 3rd channel operates G/M.

  • Page 19: Dmx Settings

    DMX Settings Press the Menu button to select DMX. Press and turn the control knob to select individual digit settings for a valid address from 1-512. On the main display, “X” next to DMX indicates DMX signal is present. All manual controls are disabled once the DMX cable is applied and DMX is turned on. To regain manual control with the DMX cable plugged in, set the DMX address to “0”.
  • Page 20 DMX Wireless Settings The Select LED includes a built-in Lumen Radio receiver and can be operated wirelessly with a Lumen Radio transmitter (sold separately). DMX Wireless is an alternative to using DMX cables. Set DMX address as previously instructed on p 19. For more information on Lumen Radio Receiver/Transmitter, see www.LumenRadio.com.
  • Page 21 Enable Enables wireless DMX. Default is OFF. Press the control knob to turn Enable ON. The following are examples of what will be seen in the main display when wireless DMX is Enabled: 1) “R” with no signal bar: Indicates wireless DMX is enabled, but there is no connection to a transmitter.
  • Page 22 Accessories DFS-SL30-H Select 30 Flozier, Half DFS-SL20-H Select 20 Flozier, Half DFS-SL30-S Select LED 30 Snapbag w/ 2 x Diffusion DFS-SL20-S Select LED 20 Snapbag w/ 2 x Diffusion LVR-SL340-S Select LED 30 Snapgrid 40 ° LVR-SL240-S Select LED 20 Snapgrid 40 °...
  • Page 23 Cases BAG-SL30 Select LED 30 Soft Case BAG-SL20 Select LED 20 Soft Case KAS-DL30 Select LED 30 Flight Case KAS-DL20 Select LED 20 Flight Case KAS-SL32 Gaffer LED 30 Ship Case (2) KAS-SL22 Interview LED 20 Ship Case (2) KAS-SL33 Select LED 30 Fixture Ship Case (3) KAS-SL23 Select LED 20 Fixture Ship Case (3)
  • Page 24 This product is made of recyclable materials and should be disposed of in accordance with governmental regulations. Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA Tel: 818 767-6528 website: www.kinoflo.com...

This manual is also suitable for:

Sys-s30-120uSys-s20-120uSys-s20-230u

Table of Contents