Installing Pedals - 3G Axel Owner's Manual

Installing Pedals

Before you put your pedals on the crank arms, be sure to take note which
pedal is which. Each pedal is indicated by a letter stamped into the end of
the pedal axle (see figure H).
When you have the correct pedal for the side you're on, thread the pedal
on using just your hands at first. It should thread in fairly easily, oth-
er-wise you may be cross threading it which will strip the threads off the
axle, ruining it. Using a wrench, tighten the pedal on fully.
Figure H
Left pedal tightens counter clockwise.
Right pedal tightens clockwise.