Congratulations on your purchase, we are sure your new watch will bring you much satisfaction! TABLE OF CONTENTS MOVEMENT PAGE 2 SETTING THE TIME & DATE PAGE 3 PAGE 4 CARING FOR YOUR LIV SWISS WATCH CLEANING PAGE 4 CONDENSATION PAGE 4 WATER RESISTANCE PAGE 4 CRYSTALS...
User’s Manual THE MOVEMENT Your watch is fitted with a LIV Caliber 36 movement. DESCRIPTION: Swiss Made Automatic 26 Jewels Height: 4.60 mm Diameter: 25.60 mm (11 ½''') Rapid date correction PERFORMANCE: Balance frequency: 28,800 vibrations per hour (4 Hz)
User’s Manual SETTING THE TIME & DATE POSITION Screwed in and flush with the case POSITION Unscrewed / Manual Winding Position POSITION Rapid Date Change POSITION Time change INSTRUCTIONS: Make sure that your watch is perfectly dry. Unscrew the crown and move it to position 1 to manually wind the watch 20 times. Move it to position 2 to set the date.
Ensure that the crown is completely screwed down and flush with the case before you get started. If the seals in your watch have been tested and changed within the last 12 months by LIV - Swiss Watches or an authorized LIV - Swiss Watches service center, then you may use a soft brush with mildly soapy water to clean the case, then rinse it off with clear water and dry it with a soft cloth.
User’s Manual STRAPS IN LEATHER, FABRIC AND PYTHON/ALLIGATOR SKIN Be sure to avoid letting the watch get into contact with water. Please note that no matter how careful you are with leather, it is a living material and its color will naturally (slightly) fade or darken over time. Leather straps should be cleaned with a dry, soft cotton cloth.