Still Image Photo Mode; Continuous Photo Mode; Power Off - Liquid Image APEX User Manual

4.3 Still Image Photo Mode - RED LIGHT
1. Press and hold POWER/MODE button for 2 seconds to turn on camera.
2. Press the POWER/MODE button 2 times again for less than a second each to
change to Photo Mode.
Note: the RED MODE LIGHT INDICATOR is on and the GOGGLE is now in
the PHOTO READY mode and set to take still images. The LCD screen
displays the Camera icon.
3. Press the SHUTTER/SELECT button once. A still image is captured.
NOTE: To capture the sharpest images, it is important that the distance between
the camera and the subject is at least .4 Meters (16 inches).
4.4 Continuous Photo Mode - PURPLE LIGHT
1. Press and hold POWER/MODE button for 2 seconds to turn on camera.
2. Press the POWER/MODE button 3 times again for less than a second to change to

Continuous Photo Mode.

Note: the PURPLE MODE LIGHT INDICATOR is on and the GOGGLE is now
in the CONTINUOUS PHOTO READY mode and set to take continuous images.
The LCD screen displays the Continuous Camera icon.
3. Press the SHUTTER/SELECT button once and the camera will start taking still
images every 2 seconds. The PURPLE LIGHT INDICATOR will continue to blink while
taking pictures.
4. Press the SHUTTER/SELECT button again to stop taking images.

4.5 Power Off

1. Press the POWER/MODE button for more than 3 second to turn the camera off.
NOTE: If either the POWER/MODE or the SHUTTER/SELECT button has not been
used in 180 seconds or the Camera Goggle is not recording, the GOGGLE will turn
off automatically.
ENG-11