Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR USE
Hot Chocolate
Hot Froth
Cold Froth
Selector Switch
SAFETY WARNINGS
- After removing the packaging, check that the
appliance is intact. If in doubt do not use the
appliance and contact your sales agent.
- Do not leave plastic bags within the reach of
children as they are potential sources of danger.
MILK FROTHER
MODEL: HM350A
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hostess HM350A
Summary of Contents for Hostess HM350A
-
Page 1: Instructions For Use
MILK FROTHER MODEL: HM350A INSTRUCTIONS FOR USE Hot Chocolate Hot Froth Cold Froth Selector Switch SAFETY WARNINGS - After removing the packaging, check that the appliance is intact. If in doubt do not use the appliance and contact your sales agent. - Page 2 - This appliance has been manufactured to make milk foam and hot/cold milk based drinks only. - This appliance is designed for and must only be used for household purposes. All other use is considered improper and as a result dangerous and voids the warranty.
- Page 3 - Keep out of reach from children when in use, the beverage will get very hot. - During cleaning, never immerse the Support Base in water. This is an electrical appliance. - When using the appliance do not touch the hot surface of the pot or the heating element.
- Page 4 IMPORTANT When using the appliance, please prepare everything first (clean the pot, fit the blender, fill with beverage) before placing the pot on the support base. Please keep the heating disc clean. Don’t leave anything on the surface of heating element or on the bottom of the pot.
- Page 5 2. Frothing Hot Chocolate Fig 7 Remove the lid. Fig 8 Press the blender onto the spigot in the bottom of the pot. Check that it rotates freely. Fig 9 Pour the required amount of milk into the pot, up to the 350 ml max level. (If more milk is poured into the pot you risk the beverage overflowing!) Fig10 Add the required amount of chocolate powder or pieces of chocolate bar into the pot.
- Page 6 CHANGING THE BLENDER/STIRRER The Milk frother is supplied with two Foam Blenders. These will produce a frothy drink. The Hot Milk Blender can be used to produce a hot drink that is not frothy. To change the blender, pull the blender upwards, at an angle to the base, to remove it from the spigot in the base of the pot.
- Page 7 Press the blender firmly down onto the spigot and retry the appliance. If this failed, replace the blender to check whether this resolves the problem. New blenders are available as a spare part. If the appliance still fails to work, please contact the Hostess Customer Service department.
-
Page 8: Technical Specification
This guideline is the frame of a European wide validity of return and Recycling on Waste Electrical and Electronic Equipment. If you encounter any problems with your Hostess Milk Frother, please contact the appropriate Service department. If the Milk Frother was bought in the UK, please contact:...
Need help?
Do you have a question about the HM350A and is the answer not in the manual?
Questions and answers