Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NC-link NC-AP111
- Page 1 User Manual of 2.4G Outdoor CPE Version V1.0...
- Page 2 User Manual of 2.4G Outdoor CPE Thank you for purchasing Enterprise High Gain Outdoor CPE. This manual will instruct you how to configure and manage this CPE, enable you to use it in a perfect status. After installed the CPE, you will be able to enjoy the surfing freely. Please check the Package before use it: Packing Detail Item...
- Page 3 User Manual of 2.4G Outdoor CPE DC: For Power supply, the DC’s electronic standard is 12V/1A. POE: This equipment can be powered over , Connect CPE’s Ethernet WAN/LAN Port with PoE adapter’s POE port by LAN Cable (CPE’s LAN port and WAN port support the 24V PoE.) ...
- Page 4 User Manual of 2.4G Outdoor CPE P3 Configure the computer’s IP address by wired P4 configure the computer’s IP by wired B. Follow P5 to configure the computer’s IP address by wireless...
- Page 5 User Manual of 2.4G Outdoor CPE P5 Configure the computer’s IP Address by wireless If you want to connect our CPE by wireless after IP address configuration, pls right click Wireless networking Connection, then View Available Wireless Networks, our CPE’s default SSID is CPEXXX, passwords: 66666666, Click Refresh network list , double click the correct SSID and input the passwords, if have, then connect, pls refer to P6 and P7 P6 CPE Wireless Connection...
- Page 6 User Manual of 2.4G Outdoor CPE P7 CPE Wireless Connection...
- Page 7 User Manual of 2.4G Outdoor CPE If your computer with build in 802.11b/g/n wireless adapter, but can’t search the available wireless networking after refresh, please contact with computer supplier or after-sale department after appear following points: Indicator 1. Right click My Network Places, select Proferties, appear Local Area Connection or Other Connection, No Wireless Network Connection 2.
- Page 8 User Manual of 2.4G Outdoor CPE...
- Page 9 User Manual of 2.4G Outdoor CPE...
- Page 10 User Manual of 2.4G Outdoor CPE...
- Page 11 User Manual of 2.4G Outdoor CPE P9 Setup Wizard Wizard Steps: 1. Choose Wizard, then click Next 2. Choose the right Operation Mode (Take W ireless ISP for example), then Next 3. WAN Setting: choose the right WAN setting Take Dynamic IP for example), click Next 4.
- Page 12 User Manual of 2.4G Outdoor CPE LAN Port Master AP or WLAN station P 10 diagram of Bridge How to Setup Repeater Mode： ① Select Repeater Mode Login Web management page, click Operation Mode, choose Repeater and then Apply. P11 Configure the Repeater Mode Note: The CPE’s system will reboot in 1 minute after choose Repeater and Apply ②...
- Page 13 User Manual of 2.4G Outdoor CPE If your PC can’t popup the page of P11, check your Browser and see whether Instruction block it or not. Or change a browser. P12 Scan Wireless AP Click Scan AP and popup attach page and click “Select AP”: P 13 Wireless AP Connection This page show wireless AP connection status, including SSID, MAC, AP Signal Strength, Link Quality and so on, if there is password in Wireless AP, input...
- Page 14 User Manual of 2.4G Outdoor CPE Please scan several times more if haven’t find the target SSID in scan list. If can’t find it still, make sure the CPE support the channel of WLAN station or AP. For example: AP’s channel is Channel 14, but CPE support Channel 13.
- Page 15 User Manual of 2.4G Outdoor CPE P15 Configure the Basic Setting Status is Enable, then CPE will open the Wi-Fi SSID means Service Set Identifier (Your Wi-Fi name). Mode is B,G,N, can set it as 801.11G or 802.11N accordingly. ...
- Page 16 User Manual of 2.4G Outdoor CPE P 16 Advanced Settings Bandwidth: set it as 20/40MHz automatically match. RF Output Power: 100%, 75%, 50%, 25%, 12.5% Other advanced Setting: Professional installation or maintenance person can set it accordingly. General, keep it default. Click Apply after setting Wireless Setting is effect for the wireless signal broadcast by CPE, it should match with the WLAN station or AP’s security.
- Page 17 User Manual of 2.4G Outdoor CPE P 17 WAN Configuration P 18 LAN Configuration P19 Wireless Configuration P20 Wireless Connect Configuration and software version Click “CPE Connect” to check the CPE connection status:...
- Page 18 User Manual of 2.4G Outdoor CPE P21 CPE Connect Status When the CPE connect with WLAN station or Wireless AP, the connect status will show Connect, then show SSID, MAC address, AP Signal strength We recommend the AP signal strength is greater than -75dBm, if signal strength weaker, CPE’s bridge effect will be worse.
- Page 19 User Manual of 2.4G Outdoor CPE P 22 Set PC’s IP Address Setting finish, input Ping command to test internet connectivity. . Management Page Click “Management” and enter into the management page: P 23 Management System: from here you can reload the backup file to restore the system, or restore to factory default, reboot the CPE through firmware ...
- Page 20 User Manual of 2.4G Outdoor CPE Upgrade Firmware: Upgrade new firmware to access stable function for System Time: Set CPE’s time How to restore factory fault by Reset Button from CPE: Press the Reset button 15 seconds, the CPE system will reboot and restore to factory Indicator settings.