Conrad N150 Operating Instructions Manual page 38

• When the page "Mode" is displayed again, click "3G" in the upper bar. Enter the following
information on this page:
"3G ISP"
"APN"
"Pin Code"
"Dialed Number"
"Username"
"Password"
"Auto Dial-up"
• To complete the process, click "APPLY" and then "RETURN" in the next window when the
WLAN is available again after a few seconds.
• Usually, the router should log on to the mobile network now. You can verify this on the status
page. If you are not yet logged on, click "CONNECT" on this page or restart the router if
required.
Before completing the basic configuration, we urgently recommend setting up the
WLAN connection with encryption. For this, observe chapter 12 of this manual.
38
Should already be set to "User defined". This selection is correct.
Enter the "Access Point Name" of your provider. For T-Mobile, this is,
e.g., "internet.t-mobile".
If your SIM card has PIN request activated, you need to enter the PIN
here.
Usually "*99#" is pre-set. Otherwise, or if your provider requires another
number, change it accordingly.
This field usually remains empty (depending on provider).
This field also remains empty (depending on provider).
Determine whether the router should log in automatically.