Bissell FMU-2000 Safety, Operation And Maintenance Manual With Parts List

High-speed burnisher

Advertisement

Quick Links

New Equipment Warranty
Limited Warranty
The manufacturer gives you the following limited warranty for this product if it was originally
purchased for use, not resale, from BISSELL BigGreen Commercial or a BISSELL BigGreen
Commercial-Authorized Retail Dealer.
The manufacturer will repair or replace, free of charge, to the original purchaser, any part
which is found to be defective in material or workmanship within one (1) year of the date of
purchase; five (5) years on the motor and gear box.
Drive belts, brushes, and other parts subject to normal wear are not covered by this limited
warranty. This limited warranty does not apply to any part subjected to accident, abuse,
or alteration, misuse, damage caused by fire or act of God, the use of voltages other than
indicated on the serial number plate of this product or service of this product by other than a
trained service technician.
The manufacturer does not authorize any person or representative to assume or grant any
other warranty obligation with the sale of this product.
The manufacturer's limited warranty is valid only if you retain proof of purchase from BISSELL
BigGreen Commercial or a BISSELL BigGreen Commercial-Authorized Retail Dealer for this
product. If you purchase this product from any other source, your purchase is "AS IS, " which
means the manufacturer grants you no warranty, and that you, not the manufacturer, assume
the entire risk of the quality and performance of this product, including the entire cost of any
necessary servicing or repairs of any defects.
The manufacturer's liability for damages to you for any costs whatsoever arising out of this
statement of limited warranty shall be limited to the amount paid for this product at the
time of original purchase, and the manufacturer shall not be liable for any direct, indirect,
consequential or incidental damages arising out of the use or inability to use this product.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER
EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.
Some states do not allow limitations on the duration of implied warranties, so the above
limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
BISSELL BigGreen Commercial
100 Armstrong Road | Suite 101 | Plymouth, MA 02360
Phone: 800-242-1378 | Fax: 877-672-4566
www.bissellcommercial.com
Make a copy of this card for future reference.
2013 © BISSELL BigGreen Commercial. All rights reserved.
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
High-Speed Burnisher
1.5 HP | 2000 RPM | 20" Apron
2000 RPM
Fully Adjustable
Balanced Design
All Metal Chassis
Quiet Motor
Important Information and Safety Instructions
Safe & Easy to Use
Register your Machine – Return your Warranty Registration Card!
Serial No:
2013 © BISSELL BigGreen Commercial. All rights reserved.
REGISTER
YOUR
MACHINE!

Advertisement

Table of Contents
loading

Summary of Contents for Bissell FMU-2000

  • Page 1 The manufacturer does not authorize any person or representative to assume or grant any other warranty obligation with the sale of this product. The manufacturer’s limited warranty is valid only if you retain proof of purchase from BISSELL BigGreen Commercial or a BISSELL BigGreen Commercial-Authorized Retail Dealer for this product.
  • Page 2: Warranty Registration

    Make a copy of this card for future reference. 2013 © BISSELL BigGreen Commercial. All rights reserved. ©2013 BISSELL BigGreen Commercial. All rights reserved. All word marks, logos,product configurations and registered trademarks are owned and used under the authority of BISSELL BigGreen Commercial. BISSELL BigGreen Commercial FMU-2000 Burnisher...
  • Page 3: New Equipment Warranty

    The manufacturer does not authorize any person or representative to assume or grant any other warranty obligation with the sale of this product. The manufacturer’s limited warranty is valid only if you retain proof of purchase from BISSELL BigGreen Commercial or a BISSELL BigGreen Commercial-Authorized Retail Dealer for this product.
  • Page 4: Safe Operating Conditions

    Lock Nut B-77 thrown out and harm the operator and damage the floor. Front Wheel Assembly FCA-1 Sweep hard floors before scrubbing or buffing. Vacuum (2000 RPM Models Only) clean carpets before shampooing or bonnet cleaning. • Train your staff in proper use of this machine. BISSELL BigGreen Commercial FMU-2000 Burnisher BISSELL BigGreen Commercial FMU-2000 Burnisher (13)
  • Page 5: Grounding Instructions

    If it will not fit into the outlet, have a proper outlet installed by a qualified electrician. The BISSELL BigGreen Commercial High-Speed Burnisher is built with a 50 foot (15 M) safety cord which plugs directly into an approved outlet. Use of extension cords is NOT RECOMMENDED.
  • Page 6 Adjust the wing nut for tightness. When 16” Crossbar M-211-A correctly installed, the collar slides easily Trigger Pins B-70 when the cam-engineered locking lever is Cross Bar Screw B-22 “up,” but is firmly fixed wen the lever is Safety Interlock Assembly SIA-1R “down.” BISSELL BigGreen Commercial FMU-2000 Burnisher BISSELL BigGreen Commercial FMU-2000 Burnisher (11)
  • Page 7 Tighten until the locking ring lies below the face of the pad. If the ring is not fully locked, it will scratch the floor. NEVER operate the burnisher without a pad. NEVER operate the burnisher with a damaged pad of without a locking ring to hold the pad in place. (10) BISSELL BigGreen Commercial FMU-2000 Burnisher BISSELL BigGreen Commercial FMU-2000 Burnisher...
  • Page 8: Operating Tips

    Use air pressure or vacuum to remove dust and debris • Uneven wear or warp to pad or brushes. Replace. from the motor vents. • Machine chassis is damaged by dropping. Replace. • Report problems and repair promptly. BISSELL BigGreen Commercial FMU-2000 Burnisher BISSELL BigGreen Commercial FMU-2000 Burnisher...

Table of Contents