Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for EV-PEAK R1
Summary of Contents for EV-PEAK R1
- Page 1 Touch screen fast charger / discharger Instruction manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION..................... 01 SPECIFICATION....................03 MAIN FEATURES.................... 04 WARNING AND SAFETY NOTES..............06 PROGRAM FLOW CHART................09 PROGRAM DESCRIPTION................10 OPERATING PROGRAM.................. 11 Touch Screen Operation................11 Connection....................12 CHARGING PROGRAM................13 DISCHARGE PROGRAM................15 Storage Program for Lithium Battery............17 BATTERY MEMORY.................. -
Page 3: Introduction
Additionally, the entire charging procedures can be recorded and generated into a charging curve for you to check on the screen. R1 comes with a memory module. Users can edit and save parameters of different batteries. Once the battery parameters are edited, the shortcut for parameters will be generated on the screen, which provides a simple on-click interface for users. - Page 4 INTRODUTION 1. DC Input 2. Temperature Sensor Port 3. Micro-USB port for firmware upgrade 4. Touch screen 5. 1- 6S cells balance socket 6. Main Output 7. Cooling fan...
-
Page 5: Specification
SPECIFICATIONS DC input Voltage: 11-24V Display Type: LCD resistive touch screen ● ● Control: Touch system Cooling system: cooling fan ● ● Backlight: Blue Weight: 450g ● ● Dimension: 120 x102 x46 mm Safety timer: 1-720min or turn off ● ●... -
Page 6: Main Features
Balancing Individual Cells Battery Discharging During the process of discharging, R1 can monitor and balance each cell of the battery individually. Error message will be indicated and process will be ended automatically if the voltage of any single one cell is abnormal. - Page 7 PC Control Software ”Charge Master” Please download the ''PC Monitor” software on our website: www.ev-peak.com. There is mini USB port in the charge which can be used to connect it to the PC. You need optional USB cable (USB A Male to Mini B Male) which is not included in the package.
-
Page 8: Warning And Safety Notes
WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please follow the instructions for maximum safety; otherwise the charger and the battery can be damaged or at worst it can cause a fire. Never leave the charger unattended when it is connected to its power supply. - Page 9 WARNING AND SAFETY NOTES Never attempt to charge or discharge the following types of batteries A battery pack, which consists of different types of cells (including ● different manufacturers) A battery that is already fully charged or just slightly dis charged. ●...
- Page 10 WARNING AND SAFETY NOTES Charging During charge process, a specific quantity of electrical energy is fed into the battery. The charge quantity is calculated by multiplying charge current by charge time. The maximum permissible charge current varies depending on the battery type or its performance, and can be found in the information by the battery manufacturer.
-
Page 11: Program Flow Chart
PROGRAM FLOW CHAT L i P o C h a r g Discharg 14.8V 4S 14.8V 4S 5000 5000mAh 5000mAh Discharg L i I o n C h a r g L i I o n L i I o n 14.8V 4S 14.8V 4S 5000... -
Page 12: Program Description
PROGRAM DESCRIPTION Depends on different battery types, the operating programs are different Operation Battery Description Program type This charging mode is for charging LiPo/ LiFe/ Lilon/ LiHV Balance Charge battery in normal mode. This program is for discharging LiPo/ LiFe/ Lilon/LiHV Storage LiPo battery which will not be used for long time. -
Page 13: Operating Program
OPERATION PROGRAM 1.Touch Screen Operation 1). Press the Left and Right Arrows on the LCD Touch Screen to scroll through the main menu screens. 2). Press the action at the button of the LCD Touch Screen to enter that menu. 3). -
Page 14: Connection
The following describes the action process of the charger, in order to lithium polymer battery charging program as an example. 1) Connecting power You can attach R1 directly to a 11-32V output power supply via the XT60 input cable. 2) Connecting The Battery Important!!! Before connecting a battery it is absolutely essential to check one last time that you have set the parameters correctly. -
Page 15: Charging Program
OPERATION PROGRAM 3.Charge program In this program, user can set the cell count, battery pack voltage, battery capacity, charge current, end voltage and charge mode, press Enter for more than 2 seconds to start charging. Notice: According to the battery capacity setting, charger will automatically set the charge current at a rate of 1C. - Page 16 OPERATION PROGRAM Go to previous screen Input voltage L i P o 4 S C H G End voltage Internal temperature Safety timer Cut-off capacity 2). View cell voltage and cell resistance 1 20m 2 15m 3 15m 4 20m Back to previous screen 3).
-
Page 17: Discharge Program
OPERATION PROGRAM 4.Discharge program In this program, user can set the cell count, battery capacity, discharge current and end voltage. Attention: Set the correct discharge end voltage, or it will cause over discharge and damage the battery. Set cell count and pack voltage Discharg Set battery capacity 14.8V 4S... - Page 18 OPERATION PROGRAM Go to previous screen Input voltage L i P o 4 S D C H G End voltage Internal temperature Safety timer Cut-off capacity 2).View cell voltage and cell resistance 1 20m 2 15m 3 15m 4 20m Back to previous screen 3).View voltage curve graph during discharging Data LiPo...
-
Page 19: Storage Program For Lithium Battery
OPERATION PROGRAM 5.Storage Program for Lithium Battery “STORAGE” is a function which is specialized for Lithium battery storage, its operation is same as the discharge program. To store for a long time and protect useful time of the battery, it automatically charge/ discharge the battery to a safe voltage. -
Page 20: Battery Memory
OPERATION PROGRAM 6. Battery Memory The charger can store up to 20 different charge/discharge profiles for your convenience, and the stored profiles can be recalled quickly without having to go through the setup process. 1). Save When you finish setting the charging/ discharging/storage parameters, please press ESC to return to the main menu screen, and go to MEMORY screen. -
Page 21: Data View
OPERATION PROGRAM 7.Data view With this program, user can check the battery cell voltage, internal resistance, input voltage, output voltage, inner temperature and external temperature. Please connect the battery to charger output port. (both main output and balance port). Input voltage Output voltage Internal temperature External temperature... -
Page 22: Lithium Battery Balancer
OPERATION PROGRAM 8.Lithium battery balancer This function is for unbalanced lithium battery pack, set the correct battery type when using this program, or it will damage the battery. The equalizer circuit will work independently and reduce the voltage difference to below 0.02V,which can prolong the lifetime of battery and reduce risks due to over discharge. -
Page 23: Digital Power
OPERATION PROGRAM 9.Digital Power In this mode, charger can provide a output power of DC 3.0V-24V for other device. Set output voltage Set output current Set output power Press Enter>2S=Start Real time output voltage Real time output current Real time output power A0: It shows the last setting here, press Start for more than 2 seconds to start if do not need any changes. -
Page 24: Forming Charge
OPERATION PROGRAM 10. Forming Charge For long time not used NiMH/NiCd battery, charger will charge the battery pack by a low current for a long time, which can depolarize and reactive battery. Capacity Current, ranges from 10mA to 1000mA Time limit,ranges from 1-24 hours Trickle,OFF/AUTO/50mA-200mA Press Enter>2S=Start... -
Page 25: System Setting
SYSTEM SETTING Notice: Please set the parameters in Setup menu when charger is powered on for the first time. This charger can recognize battery cell count automatically. It has a precharge function which can reactive the slightly over discharged battery. user can set the precharge time(normally 2 minutes) in the menu. - Page 26 SYSTEM SETTING Go to next screen Set safety timer:OFF/1-720min Set screen brightness: OFF/10%-100% Set melody Button sound:ON/OFF Set buzzer volume:ON/OFF Go to next screen Set balance force trigger voltage, for LiPo/LiFe/LiIon/LiHV battery -1.00V ONLY. 0.1A Set full force Set discharge mode CC or CV, for LiPo/LiFe/LiIon/LiHV/Pb battery ONLY.
- Page 27 SYSTEM SETTING Notice: When in this program, Pb battery is recommended to connect to the charger input port, DO NOT use NiMH/NiCd as a “battery power”. User can set the user name and it will be displayed once charger powered on. S E R N A M E S E T U P B C D E F G H I J K L M .
-
Page 28: Error Message
ERROR MESSAGE Incorrect polarity connected Process interrupted Output short circuit Input voltage error Charger fault Battery total voltage is lower than setting value, please check the cell count. Battery total voltage is higher than setting value, please check the cell count. Voltage of one cell in the battery pack is too low. - Page 29 ERROR MESSAGE Voltage of one cell in the battery pack is too high. The battery balance connection is wrong. Please check the connector and cable. Temperature too high, please check the temperature sensor and take cooling measures. Output power is higher than setting in digital power mode Output current is higher than setting in digital power mode...
-
Page 30: Authentication Information
AUTHENTICATION INFORMATION... -
Page 31: Warranty
7.Disassembly, modification by the user (modifying original connectors, wires, components, etc.). 8. Mechanical damage due to external causes SHENZHEN EV-PEAK NEW ENERGY TECHNOLOGY CO.,LTD www.ev-peak.cn Product specifications and information mentioned in this manual are for reference only, subject to updates without notice.
Need help?
Do you have a question about the R1 and is the answer not in the manual?
Questions and answers